PSA PIN Calculator Dump to Pin

 
Thank you for reading this post, don't forget to subscribe!

PSA PIN Calculator Dump to Pin introduces a full range of ABRITES features for PSA vehicles, including licenses PN009, PN017, PN018, and PN019.
The PN009 Engine Control Unit Advanced Diagnostic license offers powerful capabilities for Peugeot and Citroën vehicles, including:

1. Read/update configuration data (EDC15, EDC17 (BOOT MODE), SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806)
2. Read/update flash memory
3. IMMO deactivation (EDC15)
4. Change/reset service intervals (EDC15, SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806)
5. Read/update motor control unit PIN codes (EDC15, SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806)
6. Reading and calibration of mileage on the dashboard of EDC16, EDC17 (BOOT MODE), SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806.
Licence PN017 - BSI, Instrument Cluster Data Manager is a leader in the field of BSI instrument cluster and odometer data calibration, covering the entire range of Peugeot/Citroën (PSA) group vehicles. It is particularly useful for:

1. Reading and calibrating the mileage stored in the instrument cluster and BSI module via OBDII
2. Disabling synchronisation between the instrument cluster and the BSI module when mileage calibration in the BSI is not possible.

Supported vehicles include all models using the CAN and UDS protocols, covering almost all models produced after 2004. Support for Delphi UDS BSI 2016+ is also included.
Supported BSI platforms are :

- Siemens K-Line
- Siemens CAN
- Johnson Controls CAN (including 2015+ with SPC microcontroller)
- Valeo CAN
- Continental UDS (including 2015+ locked)
- Valeo UDS
- Delphi CAN (Latin America)
- Delphi UDS
The models supported for mileage calibration are listed below:

PEUGEOT

    208 II
    308 II
    508 II
    2008 II
    3008 II
    5008 II
    Partner III
    Traveller
    206+
    207
    207+
    208
    301
    307 CAN
    308
    RCZ
    407
    408
    508
    607 CAN
    807 CAN
    2008
    3008
    5008
    Partner II
    Expert

CITROEN

    C3 III
    C3 Picasso
    C3 Aircross
    C4 III
    C4 Picasso II
    C4 Aircross
    C4 Cactus
    C5 Aircross
    Berlingo III
    Partner
    C3 CAN

    C3 II
    C-Elysee
    C4
    C4 II
    C4 Cactus
    C4 Picasso
    C5
    C5 II
    C6
    C8 CAN
    Berlingo II
    Jumpy
    Dispatch
    Spacetour

    DS
    DS 3
    DS 3 Crossback
    DS 4
    DS 4 II
    DS 5LS
    DS 5
    DS 6
    DS 7 Crossback

Toyota

    ProAce 2016+

Lancia

    Phedra 2008+

Opel/Vauxhall

    Crossland
    Grandland
    Corsa F
    Combo
    Combo E
    Mokka
    Vivaro 2019+
    Zafira Life 2019+

Fiat

    Scudo 2022+

Ulysse 2022+

The PN018 PIN Manager from PSA PIN Calculator is a state-of-the-art solution for programming keys and remote controls for Peugeot/Citroën PSA vehicles. Abrites excels in PIN reading and key/remote programming for the entire vehicle range. The PN018 can read the PIN code of all types of BSI and program keys via OBDII, bypassing the standby mode for models from 2018 onwards.
The following BSI platforms are compatible:

    Siemens K-Line
    Siemens CAN
    Johnson Controls CAN (including 2015+ models with SPC microcontroller)
    Valeo CAN
    Continental UDS (including locked 2015+ models)
    Valeo UDS
    Delphi CAN (Latin America)
    Delphi UDS

Models supported for PIN code reading :

 

PEUGEOT

    208 II
    308 II
    508 II
    2008 II
    3008 II
    5008 II
    Partner III
    C3 CAN
    C3 II
    C-Elysee
    C4
    C4 II
    C4 Cactus
    C4 Picasso
    C5
    C5 II
    C6
    C8 CAN
    Berlingo II
    Jumpy
    Dispatch
    Spacetour

CITROËN

    C3 III
    C3 Picasso
    C3 Aircross
    C4 III
    C4 Cactus
    C4 Picasso II
    C4 Aircross
    C5 Aircross
    Berlingo III
    Partner
    C3 II
    C3 CAN
    C-Elysee
    C4
    C4 II
    C4 Cactus
    C4 Picasso
    C5
    C5 II
    C6
    C8 CAN
    Berlingo II
    Jumpy
    Dispatch
    Spacetour

DS

    DS 3
    DS 3 Crossback
    DS 4
    DS 4 II
    DS 5LS
    DS 5
    DS 6
    DS 7 Crossback

Toyota

    ProAce 2016+

Lancia

    Phedra 2008+

Opel/Vauxhall

    Crossland
    Corsa F
    Combo
    Combo E
    Grandland
    Mokka
    Vivaro

Fiat

    Scudo 2022+
    Ulysse 2022+

 

BSI Exchange allows the entire contents of one BSI to be read and transferred to another.
The PN019 Advanced Coding Configuration provides the ability to modify various coding parameters in PSA vehicle modules, including 2016 and newer models. Key features include

    Modification of current configuration settings
    Carrying out renovations to the vehicle

    The entire range of PSA vehicles, including 2016 models through to the latest.

Additional features:

    Coding of retrofitted units as if they were originally installed on the vehicle
    An AVDI interface with an active AMS is required to purchase and use this special feature set.