Genuine Andis Ultraedge Blades

*MADE IN THE USA

*Prices (vary) are per blade-

*You pick size or sizes you want from menu

Andis® UltraEdge™ Clipper Blades are made from carbon-infused steel for a harder cutting surface that lasts longer.

Andis® UltraEdge™ dog clipper blades are made from high-carbon steel and processed through a unique carburizing heat treatment that actually adds carbon to the metal, producing a harder cutting surface. Blades hold a razor sharp edge that will endure prolonged use and more sharpening treatments.

Carburized hardening process delivers the longest lasting, smoothest cutting blades

Each Andis UltraEdge clipper blade is sharpened to exact quality standards and is hand-tested before it is shipped. Blades have a Rockwell Hardness rating of 65.

**NOTE: Blades WILL NOT FIT ALL CLIPPERS-Compatible with most Hair Stylist, Barber and Pet Grooming corded and cordless Clippers from Oster®, Andis®, Conair®, Laube®, Geib®, Moser®, Aesculap® and Wahl® which take full size, professional, detachable style (also called A5,AG or BG) clippers (see below for more info on compatible clippers). 

Brand new in manufacturers original package!!!

*Beware of other clippers, blades and products which are knock-offs or are being sold as new when are actually used, re-furbished, returns or older models...we are an authorized, independent retailer, Grooming & Pet Supply Shop and sell only NEW, Top Quality products.

*BELOW ARE SUGGESTED USES FOR EACH BLADE SIZE - Please note that these are only suggested uses.

SUGGESTED BLADE USES

Size 50 Blade has a 1/125" / 0.5 mm Blade Cut

Often referred to as a "Vet" blade.

These stainless steel clipper blades are preferred by veterinarians because they are less likely to rust or discolor from frequent use of strong disinfectants.

A # 50 blade is a "surgical" blade -  when used alone will cut hair very, very close. Frequently used by vets for surgical preparation. Good for surgical trims, and for poodle feet and faces. Also used when making patterns in hair.

Size 40 SS Blade Leaves hair 1/100", 0.25 mm long
These stainless steel clipper blades are preferred by veterinarians and groomers because they are less likely to rust or discolor from frequent use of strong disinfectants.

Best used for ears, eyes and pads and is more generally used with Clip on (AKA Universal, Snap On, Guide, Attachment, Guard) combs to achieve uniform and longer hair lengths...I do also sell the clip-on comb sets separately. The Size 40 Blade if used without a comb attachment should only be used by experienced groomers as it cuts very close. An ideal blade for show poodles. This blade is also used by veterinarians for prepping pets for all types for surgery though a size 50 blade is more commonly used.

Size 40 Blade Leaves hair 1/100", 0.25 mm long
Best used for ears, eyes and pads and is more generally used with Clip on (AKA Universal, Snap On, Guide, Attachment, Guard) combs to achieve uniform and longer hair lengths...I do also sell the clip-on comb sets separately. The Size 40 Blade if used without a comb attachment should only be used by experienced groomers as it cuts very close. An ideal blade for show poodles. This blade is also used by veterinarians for prepping pets for all types for surgery though a size 50 blade is more commonly used.

Size 35 Blade has a 1/75" / 0.4 mm Blade Cut

A #35 is in between a #30 and #40 blade and has many uses.

A # 35 blade used alone will cut hair very close.  Used for close clipping of face, feet and tail. The ridged bottom of the blade set helps it stay cooler during use. Can be used on feet or between pads and is more generally used with Clip on (AKA Universal, Snap On, Guide, Attachment, Guard) combs to achieve uniform and longer hair lengths...I do also sell the clip-on/Guide/Attachment comb sets separately. This blade is also used by veterinarians for prepping pets for all types for surgery though a size 40 or 50 blade is more commonly used. Please note, blade appearance may be slightly different than in pictures.

Size 30 blade has a 1/50" (.5 mm) blade cut

A # 30 blade is a "surgical" blade - used alone will cut hair very close.  Can be used on feet or between pads and is more generally used with Clip on (AKA Universal, Snap On, Guide, Attachment, Guard) combs to achieve uniform and longer hair lengths...I do also sell the clip-on/Guide/Attachment comb sets separately.

Size 15 blade leaves hair 3/64"/1.2mm.

Frequently used on ears, feet, tail base, face, sanitary area and throat. Common blade for Horse Grooming/Clipping. Also can be used for very short cuts on body of any breed. The Size 15 Blade is often used on Poodles for clipper work on the face, feet and tail. The Size 15 Blade is ideal when the Size 10 Blade is not smooth enough and a Size 30 Blade is too close. This blade can also be used for sanitary prep.

Suitable for all breeds of dogs and cats, horses, etc

# 10- leaves hair 1.8mm /1/16" long

MOST COMMONLY USED Size 10 clipper blades have a 1/16" blade cut (1.8 mm) that’s ideal for underbelly work, terrier ears, and poodle faces— a good choice if a fairly close and smooth finish is desired

Ideal for underbelly work, terrier ears, and poodle faces

Often used for stripping coats when the mats are close to the skin

A popular choice for groomers who are doing body work on schnauzers.

Suitable for all breeds of dogs and cats, horses, etc

Size 9 Blade leaves hair 5/64"/2mm long.

Use this blade for face, necks and short cut on bodies. Leaves a very smooth finish. Popular on Cockers, Springers and Schnauzer bodies, and similar breeds.

Suitable for all breeds of dogs and cats, horses, etc

Size 8 1/2 blade leaves hair 7/64"/2.8mm long.

This blade is a good choice when a Size 10 blade is too close for sensitive skin. Use this blade for face, necks and short cut on bodies. Leaves a very smooth finish. Use this blade for body work on any breed.

Suitable for all breeds of dogs and cats, horses, etc

Finish or “F"  (also referred to as FC or Finish Cut ) Blades

3F, 4F, 5F, 7F, etc. (also referred to as 3 3/4 FC, 4FC, etc)
The teeth on this blade are even, creating a smoother finish. Can be used before and after the bath. Used for a smoother finish, to “finish off” a clip after using a skip tooth blade and full body shavedowns when hair is not too matted. Finish cut blades work best on hair or coats that are clean, dry and brushed free of most mats and tangles.

Size 7FC Clipper Blade has a 1/8" / 3.2 mm blade cut.

# 7F - Finish Cut blade can be used as a finishing blade for a Size 7 Skip-Tooth, as well as for body work on any breed. Perfect when a short, finish clip is desired. Frequently used on unmatted cats. Suitable for all breeds of dogs and cats, horses, etc.

Size 6FC Clipper blade has a 3/16" (4.8mm) blade cut.
(Also called 6F, 6 F, )

Size 6 FC eliminates the need to use a guide comb, allowing for a faster, more convenient cut. Can be used for body clipping on any breed. Leaves hair a bit longer than a 7FC blade. Also Used for specialty texturizing.

Size 5FC Blade has a 1/4" / 6mm Blade Cut

Most often used to achieve a smooth, short "lamb" like clip or finish on any breed. Is effective for finishing the coat after trimming with a #5 skip tooth blade Leaves a nice finished length on the coats of wire, welsh, and Lakeland terriers...not too short, not too long! Suitable for all breeds of dogs and cats, horses, etc

 Size 4 1/2FC clipper blade has a blade cut of 5/16" (7.9 mm).

(Also called 4.5F, 4.5FC, 4.5 FC, 4 1/2 FC)

Size 4 1/2FC eliminates the need to use a guide comb allowing for a faster, more convenient cut. Can be used for body clipping on any breed. Leaves hair a bit longer than a 5FC blade. Also Used for specialty texturizing.

Size 4FC Blade has a 3/8" / 9.5 mm Blade Cut

Full/Finish cut blade can be used as a finish blade for a size 4 Skip Tooth blade, also for body work on short-legged terriers (westie, etc.) and poodles, and short puppy cuts on Lhasa’s or any other breed.

This blade can be used for body work or clips on any breed. Also used against the lie of the coat of thick-coated Springers or Cockers for a very short but very smooth look.

Suitable for all breeds of dogs and cats, horses, etc

3 3/4FC blade is also known as a 3FC or 3F blade and leaves hair 1/2" or 13mm long

Great for full body clipping on any breed.

This is a full, finish cut blade used for body work on pet bichons and poodles, and short "puppy" cuts on lhasas, shih tzus and similar breeds.

This size is used to achieve a smooth, velvety finish on any breed. Use this blade for a smooth finish that most closely resembles hand scissoring Blade of choice for a short clip on a mixed breed, lhasa, shih tzu, yorkie or maltese Suitable for all breeds of dogs and cats, horses, etc. This blade is the one of the LONGEST in the Barber & Beauty trade as well as the Animal Grooming industry, cuts smoother and moves through hair easier than a blade with an attachment comb.

Size #3/4 HT leaves hair 3/4" (19mm) long!

Finish Cut. This blade is the LONGEST in the Barber & Beauty trade as well as the Animal Grooming industry, cuts smoother and moves through hair easier than a blade with an attachment comb.

This is a full cut blade used for body work on pet bichons and poodles, and short puppy cuts on lhasas, shih tzus and similar breeds. Used for clipping long, fluffy body and leg styles. Works well on unmatted coats.

Size 5/8 HT leaves hair 5/8" (16mm) long!

Finish Cut.This blade is the one of the LONGEST in the Barber & Beauty trade as well as the Animal Grooming industry, cuts smoother and moves through hair easier than a blade with an attachment comb. This is a full cut blade used for body work on any breed especially on pet bichons and poodles, short puppy cuts on lhasas, shih tzus, and similar breeds. Works well on unmatted dogs.

Skip Tooth Blades(also called Saw tooth blades)

Skip Tooth Blades are generally used instead of a finish cut blade when:

Hair or coat is heavily matted or for VERY thick coats. -The coarse or uneven teeth on a Skip Tooth will feed the hair into the cutting blade more effectively, which allows you to clip under mats.
Often used before the bath for rough-cuts, and on dogs that must be shaved completely down. Perfect for blending short areas with longer lengths. Ideal for coarse-coated breeds such as Terriers  

A hair cut using a skip tooth blade is generally "finished" off with the same size finish blade to give coat a smooth, finished appearance...for example: if you cut hair with a 4 skip-tooth blade, finish off with a 4F blade

Be extra Careful when using as skip tooth blade as they cut closer to the skin. Skip Tooth blades are not recommended to be used on cats.

Size 7 Skip Tooth Clipper Blade has a 1/8" / 3.2 mm blade cut.

Size 7 Skiptooth blade leaves 1/8". This blade can be used for body work on any breed. Suitable for all breeds of dogs and cats, horses, etc. The shortest of the skip tooth blades, the Size 7 is used frequently on very matted dog coats. The Size 7 Skip Tooth blade cuts through mats that other length blades cannot penetrate. The coat is more accessible to the cutting blade because of the flat design of this blade. The teeth are more open which allows the coat to be cut easier than the 7F blade with its full teeth.

Suitable for all breeds of dog, horses, etc

Size 5 Skiptooth blade leaves 1/4" / 6.5mm

The Size 5 Skip Tooth blade, like the size 7, cuts through mats that longer length blades cannot penetrate. The coat is more accessible to the cutting blade because of the flat design of this blade. The teeth are more open which allows the coat to be cut easier than the 5F blade with its full teeth.

Frequently used on fluffy type coats such as Poodles, Bichons and dogs with similar type coats. Also body work on Sporting Breeds and Terriers, Pet Poodles, body work or short trims on Lhasa Apso’s and Shih-Tzu’s.

Suitable for all breeds of dog, horses, etc.

Size 4 Skip Tooth Blade has a 3/8" / 9.5 mm Blade Cut

The Size 4 Skip Tooth blade cuts through mats that finish cut (FC or F blades) blades cannot penetrate. The coat is more accessible to the cutting blade because of the flat design of this blade. The teeth are more open which allows the coat to be cut easier than the 4F blade with its full teeth. A hair cut using a skip tooth blade is generally "finished" off with the same size finish blade to give coat a smooth, finished appearance-skip tooth blades will leave an unfinished, jagged like appearance.... for example: if you cut hair with a 4 skip-tooth blade, finish off with a 4F blade.

This blade can be used for body work on any breed when a little bit longer cut is desired. Most often used for Body work on the low-slung Terriers (West Highland White, Scottish, Cairn, etc.), Pet Poodles, short trims on Lhasa Apsos and Shih-Tzus.

Suitable for all breeds of dog, horses, etc.

3 ¾ Skip Tooth Blade has a 1/2"/13mm Blade Cut (Also called a 3 Skip Blade)

This blade can be used for body work on any breed where a longer length is desired. The Size 3 3/4 Skip Tooth blade cuts through mats that finish cut (FC or F blades) blades cannot penetrate. The coat is more accessible to the cutting blade because of the flat design of this blade. The teeth are more open which allows the coat to be cut easier than the 3 3/4FC blade with its full teeth. A hair cut using a skip tooth blade is generally "finished" off with the same size finish blade to give coat a smooth, finished appearance-skip tooth blades will leave an unfinished, jagged like appearance.... for example: if you cut hair with a 3 3/4 skip-tooth blade, finish off with a 3 3/4FC blade.

Suitable for all breeds of dog, horses, etc.  

SPECIALTY BLADES

Blending Blade Medium has an 1/16" (1.5 mm) blade cut.

This blade is wider than a traditional blade, so you can cover more surface area in less time. Makes grooming more efficient and saves you time. Used for easy blending and fading coats, leaving a smooth finish.

Super Blocking Blade has a 1/150 in. (0.05mm) Blade Cut.

Blocking Blade has a 5/64" (2mm) Blade Cut.

Blocking blade is ideal for full clipdowns on matted dogs and large animals, free-hand shortening of coats before scissoring, blocking or skimming. Used for removing the bulk of hair and clipping pattern lines on large breeds with heavy coats.

These sharp blocking pet clipper blades are excellent for full, fast clipdowns or shavedowns on matted dogs, livestock, etc. Covers a larger area than regular blades.

Not recommended for use directly against dog’s skin.

T-10 Wide clipper blade has a 1/16" (1.5mm) cut.

Also called a TDQ (Take Down Quick) Blade as they are wider than a regular blade and cover a larger area faster than regular blades.

Groom more efficiently by using this Andis® UltraEdge T-10 Wide Clipper Blade. This blade is wider than a traditional #10 blade, so you can cover more surface area in less time.These pet clipper blades are excellent for full, fast clip downs or shave downs on matted dogs, livestock, etc.

Use for stripping large dogs and livestock and are excellent for full clip or shave downs on matted dogs Also ideal for free-hand shortening of coats before scissoring, blocking or skimming. Great for full body clipping on any breed.

T-84 Wide clipper blade has a 3/32" (2.4mm) cut.

Also called a TDQ (Take Down Quick) Blade as they are wider than a regular blade and cover a larger area faster than regular blades. Leaves hair longer than a T-10 Blade.

Groom more efficiently by using this Andis® UltraEdge T-84 Wide Clipper Blade. This blade is wider than a traditional blade, so you can cover more surface area in less time.These pet clipper blades are excellent for full, fast clip downs or shave downs on matted dogs, livestock, etc.

Use for stripping large dogs and livestock and are excellent for full clip or shave downs on matted dogs Also ideal for free-hand shortening of coats before scissoring, blocking or skimming. Great for full body clipping on any breed.

Size 5/8 wide (also called 5/8 n or narrow, 5/8 wide, 5/8w) blade has a 1/32"/0.8mm blade cut.

Cutting surface is 5/8" across. For small areas. Commonly referred to as a “foot”, “toe” , "pad" or “feet” blade as it is best for clipping in and around feet/pads is also good for clipping small areas. Ideal for setting patterns such as the Dutch Clip on Toy Poodles, great for small Poodle feet.

Compatible Clippers:

**NOTE: WILL NOT FIT ALL CLIPPERS -Compatible with Hair Stylist, Barber and Pet Grooming corded and cordless Clippers from Oster®, Andis®, Conair®, Laube®, Geib®, Sterling, Moser®, Aesculap® and Wahl® which take full size, professional, detachable style (also called A5,AG or BG) blades.

(Note: list may not be complete as manufacturers are always coming out with new models-If your clipper model is not on list please ask before purchasing and I check to see if compatible):

Oster® models:

Oster® Pro 3000iTM Cordless Clipper Powered by Lithium-Ion Battery Technology (all models) - 078003-100-000, 078003-050-000, 078003-700-000

Oster® Golden A5® 2-Speed Clipper (all models) - 078005-140-003,

Oster® Golden A5® Single Speed Clipper (all models - 078005-010-003, 078005-050-003

Oster® Turbo A5® 2-Speed Clipper (all models & colors) - 078005-314-003, 078705-100-000, 078005-318-000, 078005-317-000

Oster® Turbo A5® Single Speed Clipper (all models) - 078005-301-003

Oster® Volt Cordless Clipper Powered by Lithium-Ion Battery Technology (all models) -078004-000-000

Oster® A6® Cool Comfort™ (all models & colors) 078006-000-000, 078006-100-000, 078006-101-000, 078006-700-000

Oster® A6® Slim (all models & colors) 078006-124-000, 078006-125-000, 078006-123-000, 078006-200-000, 078006-126-000

Oster® Power Max A5® 2-Speed Clipper (all models & colors) -078004-011-000

Performax (all models)

Oster® PowerPro® Ultra Cordless Clipper (all models) 078400-020-000, 078400-030-000

 Powerpro (all models)

Outlaw, Outlaw Ink (all models)

Oster® Classic 76® Universal Motor Clipper - (all models & colors) 076076-010-003, 076076-226-000, 076076-077-000,

Oster® Turbo 111® Universal Motor Clipper (all models) 076111-140-000, 076111-160-000

Oster®Primo™ Heavy Duty Detachable Blade Clipper 076175-310-000

Oster® Model One™ Slimline, Heavy Duty Detachable Blade Clipper 076175-010-000

Oster® Model 10™ Heavy Duty Detachable Blade Clipper 076010-010-000

Oster® Titan® 2 Speed Universal Motor Clipper 076076-310-002

Oster® Power Line™ Universal Motor Clipper 076076-040-000

Oster® Octane® Heavy Duty Cordless Hair Clipper Powered by Lithium-Ion Battery – (All models) 076550-100-001

Classic 97 97-44 220 volt Clipper

Star-Teq, Power-Teq

Andis® models:

All AG®, AGC®, AGP, AGR, BG, BGC, BGC-2, BDC, BGR, MBG, AGR+, BGR+, AGRC, BGRC, AGRV, BGRV, BGCL, AGCL, DBLC, SMC, MBG, MBG2, Clippers,

UltraEdge® AGC® Super 2-Speed (all colors),

Endurance BDC (all colors) 65385 & 65330.

Excel 5-Speed+ SMC (all colors) 65355, 65290, 65455, 65375,