The Ultimate Starter Kit
Soldering & Hot Air Station Bundle

This Bundle Includes Everything You Need To Get Properly Started



This kit includes all the necessary tools such as soldering iron, solder wire, desoldering pump, hot air gun, and other accessories to help you get started. With this kit, you can practice & vastly improve their soldering skills making it an essential tool for repair shop training, hobbyists and DIY enthusiasts.  The soldering iron has 70W of power and the hot air gun has 750W of power. This provides sufficient heat for most soldering tasks.

Everything Included In Bundle:

Soldering & Hot Air Station

Multimeter
Solder Iron Tinner
Desolder Suction Tool
Screwdriver Set
Soldering Iron Tip Cleaner
Soldering Flux Paste
IC Puller
Large Heat Resistant Silicon Electronics Soldering Mat
Small Soldering Project Practice Kit



Parameter usage and operation of hot air gun and electric soldering iron
Application scope of welding station




Make sure the power cord is firmly connected to the machine.

Induction system

Independent switch

Please note that

Before starting the machine, make sure that the power cord is firmly connected to the machine until it can be powered on normally. The machine can work normally only when it is normally powered on.

Induction system

The handle of hot air gun is an induction system. After the machine is connected to the power supply, make sure that the handle of hot air is placed on the bracket before opening. Then turn on the independent switch of the hot air gun, and pick up the handle to enter the working state.

Design of independent switch

Connect the Soldering iron handle and the hot air gun handle with the corresponding interface. After the power is turned on, turn on the corresponding independent switch and pick up the handle to enter the working state.