550G High Speed Electric Stainless Steel Spice Grinder Electric Flour Mill Herb Grinder Powder Machine for Dry Food Grin
Specification
Style | Herb Grinder |
Color | Silver |
Product Dimensions | 9.84 x 7.87 x 3.15 inches |
Wattage 2000 watts | Capacity 550 Grams |
Material Stainless Steel | Item Weight 550 Grams |
Item Weight | 1.21 pounds |
Manufacturer | LEJIEYIN |
Brand | LEJIEYIN |
Size | 550g |
8.07 inches x 16.18 inches x 7.64 inches. Weight: 1.21 lb
Item Description
- ✅ MIXER GRINDER : Power:2000W ; Capacity:550g; Interval Time:5-10 min;Rotating Speed: 25000R/Min,Triples blade: grinding blade, rotary blade, and powder removal blade, can be pulverized easily. Crushing fineness reaches from 50 to 300 mesh no more than a minute.metal motor blade: wear resistance good.Dry raw materials only.wet, moisture or oil materials can't be ground
- ✅ MULTIPURPOSE GRINDER MILL - Widely used for grinding grains (soy, corn, barley, rice, wheat, mung beans, coffee beans), spices (star anise, fennel, pepper, rosemary) ,herbs ,sesame, peanuts, walnuts.The herb grinder electric is applied to milling work of dried food such as herbal medicine,Please make sure the materials you gonna to grind cover the long blade and no more than 2/3 of the jar .
- ✅ SUPER SAFE: Spice herb grinder made of food-grade stainless steel, sturdy and durable.The mill grinder will automatically turn off the power when overloaded, to protect your safety, gently press red button reset, you can continue to use it normally.Recommend use time is no more than 3 minutes. Do not continuously operate the machine, and it takes 5-10 minutes to rest after every 3 minutes of grinding work.
- ✅SCOPE OF USE :Grain and corn grinder is widely used in families, kitchens,restaurants,clinic,hospital,pharmacy, institute laboratories,medicine processing factory,food store and powder processing,valet processing of health care products crushing sales counters,instead of traditional grinders.If there is anything we can help with,warmly welcome to contact us.
- ✅CLEANING AND STORAGE: 1. After each grinding, use a moist paper towel or cloth to clean up the food powder, not directly rinse with water,which will damage the motor;2. After cleaning, please put it in a ventilated place, so that the inner compartment to keep dry, do not put in the sun,check the dry and then cover the lid and store
- ❗ ❗ ❗ USE TIPS: 1. This electric grinder mill can only be turned on after the lid is fully buckled.2. The materials ready for grinding must be dry enough. 3. Rest the machine for 5-10 minutes after every 3 minutes operation. 4. Do not put the material over 2/3 of grinding bin. 5.Don't clean the grinding tank with the water directly. Keep water away the grinding tank and use dried rag or brush to clean the machine.
- ❗ ❗ ❗ Tips : Due to brush motor,if they both spark and light up in the motor area and fumes arise is normal, which will disappear after you use the machine some times later. when the first several uses there may be a smell, you can Grind some Rice or Dried Tea first for several times to eliminate the odor.
- ❗ ❗ ❗ USE SAFE : Our machine has UL certification,FCC certification, CE certification, The machine has overload protection and will automatically disconnect the power,please feel free to use,for more considerations and questions, please refer to the instruction manual.
- ❗ ❗ ❗ PLEASE MESSAGE US: If you are in any way dissatisfied with your transaction with us before giving féẹd-báck. We endeavor to make our customers happy, and would appreciate the opportunity to rectify any issues that may occur.
Product Description
IMPORTANT ATTENTIONS :
1. The materials ready for grinding must be dry.Wet materials should be dried first.Oily raw materials will stick to the the crushing bin,not recommended.
2. Recommend grinding capacity one time: the material you gonna to grind one time must cover the long blade in the middle and no more than 2/3 of the tank.
3. Recommend use time: no more than 3 minutes. It takes 5-10 minutes to rest after every 3 minutes of work.
4. Please do not turn on the machine when the top cover is open.
5. Please change the barbon brush and blade afer long time use.
6. Please check the screws of the blade.
7. CANNOT be cleaned with water directly. You can clean up the remaining powder inside the jar with a cleaning brush and then wipe the inside of jar with a dry cloth.
8. To remove the blades, Use a screwdriver to hold down the middle screw, and Drive the wrench or sleeve counter-clockwise to loosen the locknut on the blade
9. Sometimes the grinder machine is not working,such as bad smell or smoke. Please don't worry and cut off the power. Check whether the CARBON BRUSHES are loosing ans Please Tighten the carbon brushes on both sides or Reducing the amount of grinding powder then try to start the grinder.
10. The working principle is to crush the material into powder by the high speed rotation of the blades. The whole process takes place in an enclosed grinding chamber, which generates heat and causes the machine to heat up. Therefore, it is normal for the grinder to be slightly heated.
11. When it starts up, please shut off the power supply immediately if the blade is stuck by the smashing materials and the motor does not run (buzzing noise occurs) to avoid burning the motor, and then remove the blocks, check the fuse and restart the machine.
3-Layer BladeThree kinds of stainless steel blades: powder blade(impact crush), rotary blade(cycle grinding), dust removal blade(clean the bottom). The fineness of grinding from 30 mesh to 300 mesh | Lid buckle designGently lock, firmly locked. Fasten the buckle during grinding to prevent powder spillage | Upgraded Air Overload ProtectionWhen overloaded(heating, overdose) the machine automatically stops, solves the problem and can be restarted simply by pressing the safety switch. | Timing switchYou can adjust time within 0~5 min, when time is up, the machine will stop automatically, no need to wait all the time, save time and effort |
Operations Guide:
- 1. Please check if the blade is loose before use
- 2. Open the upper cover and put the material inside,(The smashing material should keep dry, no moisture and grease)
- 3. Close the upper cover tightly,(Please make sure the materials you gonna to grind cover the long blade and no more than 2/3 of the jar)
- 4. Plug in and turn on the timer switch, then turn on the switch for grinding (Do not continuously operate the machine, and it takes 5-10 minutes to rest after every 3 minutes of grinding work.)
- 5. Turn off the switch, (When you hear the sound rolling evenly, the material has been grinded into powder, then you can turn off the switch)
- 6. Disconnect power supply before opening;
- 7. Open the upper cover and brush the powder out.(Do not clean the machine with water, you can clean the machine by cloth or brush.)
What's in the box ?
- Electric Grain Grinder X1
- Spare Blade X6
- Spare Carbon Brush X4
- Spare Carbon Brush Covers X4
- Spare Screws X4
- Spare Nuts X2
- Flour Sieve X1
- Cleaning Brush X1
- Sleeve X1
- User’s Manual X1
Add to Cart | Add to Cart | |||
---|---|---|---|---|
Customer Reviews | 4.3 out of 5 stars 1,458 | 4.3 out of 5 stars 1,458 | 4.3 out of 5 stars 1,458 | 4.3 out of 5 stars 1,458 |
Price | $47.95$47.95 | $69.95$69.95 | — | — |
Capacity | 150g | 550g | 750g | 1000g |
Rated Power | 900W | 2000W | 2000W | 2400W |
Voltage | 110V | 110V | 110V | 110V |
Working Time | 0-5 minutes | 0-5 minutes | 0-5 minutes | 0-5 minutes |
Interval Time | 5-10 minutes | 5-10 minutes | 5-10 minutes | 5-10 minutes |
Mill Fineness | 50-300 mesh | 50-300 mesh | 50-300 mesh | 50-300 mesh |
Crush Level | Superfine Crush | Superfine Crush | Superfine Crush | Superfine Crush |
Package List | 1*Grinder,2*Rotary Blades,2*Powder Blades,2*Dust Removal Blade,4*Carbon Brushes,4*Carbon Brush Covers,4* Screws,2*Nuts, 1*Sleeve,1*Brush,1*Manual | 1*Grinder,2*Rotary Blades,2*Powder Blades,2*Dust Removal Blade,4*Carbon Brushes,4*Carbon Brush Covers,4* Screws,2*Nuts, 1*Sleeve,1*Brush,1*Manual | 1*Grinder,2*Rotary Blades,2*Powder Blades,2*Dust Removal Blade,4*Carbon Brushes,4*Carbon Brush Covers,4* Screws,2*Nuts, 1*Sleeve,1*Brush,1*Manual | 1*Grinder,2*Rotary Blades,2*Powder Blades,2*Dust Removal Blade,4*Carbon Brushes,4*Carbon Brush Covers,4* Screws,2*Nuts, 1*Sleeve,1*Brush,1*Manual |
Commercial Motor | ✓ | ✓ | ✓ | ✓ |
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.