1X C4-3 24VDC RELE ITALIANA Plug-in Power Relay 24V DC 3PDT 10A W/ LED Indicator, Test/Lock Button

Ready to Ship

30-Day Return

1 Unit of C4-3 24VDC RELE ITALIANA Plug-in Power Relay 24V DC 3PDT 10A W/ LED Indicator, Test/Lock Button

Sofitrek Product Disclaimer
Nature of Goods:
All products offered by Sofitrek are surplus items. These products may originate from older batches, series, or have earlier date codes compared to those currently provided by the original manufacturers or their authorized dealers.
Non-Affiliation:
Sofitrek operates independently and is not an authorized distributor, nor is it affiliated or associated with the manufacturers of the products sold. Consequently, Sofitrek does not represent the manufacturers of these products in any capacity.
Exclusion of Manufacturer's Warranty:
Since Sofitrek is not an authorized distributor, the original manufacturer's warranties are explicitly not applicable to the products sold. This includes any implied warranties of merchantability or fitness for a particular purpose.
Firmware and Software:
Some products may include pre-installed firmware or software. However, Sofitrek does not guarantee the presence, compatibility, or the revision level of such firmware or software as suitable for your specific application. Furthermore, Sofitrek expressly disclaims any representation regarding your right or ability to download, obtain, or install any firmware or software for the products from any source, including the original manufacturers or their distributors.
Limitation of Liability:
Sofitrek shall not be held liable for any form of damages—direct, indirect, incidental, consequential, or otherwise—arising from the use, misuse, or inability to use any product sold. This includes, but is not limited to, damages for loss of profits, goodwill, use, data, or other intangible losses. The buyer assumes all responsibility for the safe and lawful use of the product and agrees to indemnify and hold harmless Sofitrek against any claims, liabilities, or expenses related to the product's use.
Compliance and Responsibility:
The buyer is solely responsible for adhering to all terms of any End-User License Agreement or similar documentation related to the products, particularly concerning the obtaining, installation, and use of firmware or software.

By purchasing from Sofitrek, the buyer acknowledges having read, understood, and agreed to this disclaimer in its entirety.
Specification
Part Number C4-3 24VDC
Type Plug-in Power Relay
Nominal Voltage 24V DC
Contact Configuration 3PDT
Rated Current 10A
Rated Voltage 250V AC / 30V DC
Max Voltage 250V AC / 220V DC
Minimum Voltage 10V AC
Power Rating (AC1) 2,500 VA
Max Instantaneous Current 15A
Single-Phase Motor Load 1/3 HP
Min. Switched Load 600mW
Min. Switched Current 5mA
Switching Power (DC1) 300W
Initial Resistance Max. 100 milliohm
Contact Material Ag88%-SnO12%
Coil Current 115mA (Direct)
Coil Resistance 210 ohm (Direct)
Rated Power 3 VA @ 50Hz (AC), 2.7 VA @ 60Hz (AC), 1.4 W (DC)
Operating Range -20% to +10% (DC), -15% to +10% (AC-50Hz)
Minimum Hold Voltage > 80% Vn (AC & DC)
Must Release Voltage < 20% Vn (AC), < 10% Vn (DC)
Thermic Insulation Class of Winding F (155°C)
Dielectric Strength (Coil/Contacts) 2,500V RMS
Dielectric Strength (Adjacent Contacts) 2,000V RMS
Dielectric Strength (Open Contacts) 1,500V RMS
Dielectric Strength (Ground/Live Parts) 2,000V RMS
Operate Time max 30ms
Release Time max 30ms
Bounces max 10ms
Insulation Resistance @ 500 VDC >1000 Mohm
Pollution Degree / Insulation Voltage 3 / 250 VAC
Environmental Protection RT I (dust protected)
Enclosure Classification IP40
Mechanical Life Expectancy 10 million operations
Electrical Life Expectancy 100,000 operations
Max Operating Frequency @ No Load 30,000 operations/hour
Max Operating Frequency @ Rated Load 900 operations/hour
Surrounding Ambient Temperature (AC) -40... + 55°C
Surrounding Ambient Temperature (DC) -40... + 80°C
Storage Temperature -40... + 80°C
Vibration Resistance 10-55 Hz, 1.5mm DA
Shock Resistance 98 m/s²
Minimum Creepage Distance (Coil-Contacts) 3.8 mm
Minimum Insulation Clearance (Coil-Contacts) 3 mm
Overvoltage Class III
Impulse Withstand Voltage Peak 4 KV
Type of Duty Continuous
Minimum Mounting Distance on PCB 5 mm
Mounting Position Any
Weight Approx. 90 grams
Connection Plug-in (11 pin)
Flag Indicator of State Yes
Protective Dust Cover Yes
LED Coil Supply Indicator Yes
Push-to-Test / Turn-to-Lock Button Yes
Identification Label Yes

Shipping Policy

Our go-to options for small to medium items are USPS Ground Advantage and USPS Priority Mail, known for their reliable tracking and peace of mind.

Smaller items might qualify for USPS First Class Mail. Contact us to discuss this option before purchasing.

Note: This method is less recommended due to the potential for delays.

Return Policy

We offer a 30-day return policy, no questions asked. If you choose to provide a reason for the return, it will assist us in improving and fix the issue.

Packaging

Our items are packaged according to their needs—some in ESD bags with pins secured in protective sponge, others in foam-enclosed boxes. For larger quantities, options include broken tubes for transistors or cartons. We welcome your suggestions for packaging preferences.