V0.3.1 Handheld Frequency Analyzer, Signal Generator 100Khz to 960Mhz MF/HF/VHF UHF Input ESD Protected Function with 2.8 Inch Touchscreen
Specification
Item model number | TinySA Spectrum Analyzer |
Product Dimensions | 6.5 x 4 x 1.57 inches; 1.76 ounces |
Country of Origin | China |
Batteries | 1 Lithium Ion batteries required. (included) |
Manufacturer | AURSINC |
4.0 inches x 6.5 inches x 1.57 inches. Weight: 1.76 oz
Item Description
- [Upgraded Version: ESD Protection Diodes] - Tinysa produced by Hugen, with V0.3.1 hardware. The firmware of the tinySA can be updated, for newest firmware version update, please refer to: tinysa .org. The displayed version info indicates "ESD protection" with a diode for improved stability, sensitivity, anti-static level and longevity
- [Frequency Range] - The tinysa spectrum analyzers use a resolution filter to isolate input power within a narrow frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. The scanning speed decreases rapidly as the frequency span increases and the RBW decreases. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes
- [2 in 1 Device] - When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator enables automatic self-test and low input calibration. The tinysa includes all the components of a traditional heterodyne swept spectrum analyzer, with a color display showing 290 scan points covering up to the full low or high frequency range
- [4 Input/Output Spec Modes] - The input/output spec of the tinysa is divided into 4 modes: Low Input, High Input, Low Output, and High Output. Spectrum Analyzer has two inputs: high-quality MF/HF/VHF input for 0.1MHz-350MHz; lower-quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters ranging from 2.6kHz to 640kHz
- [PC Control] - The USB interface realizes the Serial over USB (CDC) protocol and a large number of commands can be called through the serial interface. The commands can be used for measurements or updating internal settings. The Windows driver will automatically install upon connecting to a Windows PC. The driver for Linux is built into the kernel. Tinysa-APP is available to control the tinysa and capture its screen.
- [Package List] - 1x Tiny sa Spectrum Analyzer(with 500mah battary, 2.8inch touchsreen) ; 2x 20cm/7.87inch RF Cable; 1x USB-C Cable ; 2x SMA Female to Female Connector; 1x Touchscreen Pen; 1x SMA Telescopic Antenna. Reliability you can trust, our spectrum analyzer caters to your diverse needs.
Product Description
TinySA spectrum analyzer with latest firmware V0.3.1 is primarily intended for 0.1MHz to 350MHz input
Tinysa produced by Hugen, with V0.3.1 hardware, brings improvements to our tinysa spectrum analyzer's performance and durability.
The firmware of the tinySA can be updated, for newest firmware version update, please refer to: tinysa .org.
Tinysa with latest firmware V0.3.1, the displayed version info is "ESD protected" meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life.
The inclusion of ESD protection ensures that the device remains stable even in environments prone to static electricity, providing reliable results for a longer period.
This heightened sensitivity allows for precise measurements across different frequency ranges, enabling users to analyze signals with exceptional accuracy, primarily intended for 0.1MHz to 350MHz.
TinySA SPECIFICATIONS
Display resolution | 320*240 pixels |
Screen diagonal | 2.8 inches |
Bits | 16 bits per RGB pixels |
Touch control | Resistive touch control |
Switch control | Jog switch control |
USB | USB serial port control |
TTL USART port | Optional TTL USART port (SW not yet implemented) on the internal PCB |
Power supply | Linear power supply to avoid switching noise |
2 IN 1 SPECTRUM ANALYZER
When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz.
- Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz.
- Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz
- Color display showing 290 scan points covering up to the full low or high frequency range.
- Input Step attenuator from 0dB to 31dB for the MF/HF/VHF input.
The drivers for the Serial over USB mode are built in Window and Linux so there are no drivers to install. Simply connect the tinySA to your PC using the supplied USB cable.
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.