Fast Shipping
On All Items

30 Days Money
Guarantee

Customer Support
Excellent Service

100% Satisfaction
Satisfaction Guaranteed

Durable Universal Hydraulic Pipe Expander Fuel Line Flaring Tool Set Dilator Scraper Cutter Hole Splint(Wk-400)_Igeelee

Durable Universal Hydraulic Pipe Expander Fuel Line Flaring Tool Set Dilator Scraper Cutter Hole Splint(Wk-400)_Igeelee

Specification

Style WK-400
Brand iGeelee
Material Steel
Batteries Required? No
Item Weight 14.41 pounds
Batteries Included? No
Package Dimensions 18.35 x 13.66 x 4.13 inches
Manufacturer iGeelee LTD


13.66 inches x 18.35 inches x 4.13 inches. Weight: 14.41 lb
 

Item Description

     

  • 💎[Multi-functions] With Flaring and Expanding functions. Includes a deburring tool for cleaning the interior and exterior of tubing. Plastic molded carrying case for neat storage.
  • 💎[High quality material]Made of durable hardened steel.Suitable for create soft copper and aluminum joints for plumbing use.
  • 💎[More Choise]Comes with six dies pipe clamp,ranging from 3/16" to 7/8" O.D. for different sized tubes
  • 💎[Convience to use]Hydraulic working and anti-skid PVC environmental protection long handle with cushioned grips for comfortable leverage while operation.
  • 💎[ATTENTION]-Not for Brakeline Fuel Transmission Brake Line

Product Description

Hydraulic Tube Expander and Flaring Tool Kit

  • Suits for 5-22mm metal pipe.
  • Only suit for SOFT tubing and piping.
  • 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 inch.

WK-400 Universal Hydraulic T Expander & Flaring Tool Accurate Pipe Fuel Line Kit

  • Imperial Standard: 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8
  • Metric Standard: 6 mm, 10 mm, 12 mm, 16 mm (= 5/8), 19 mm (= 3/4), 22 mm
  • Due to the heavyweight, the suitcase may be dented or cracked during transportation. The tool may have some scratches, but it can be used normally.
  • Please don't mind! And don't worry about quality.

Feature

  • Suits for 5-22mm metal pipe
  • Universal Hydraulic Flaring Tool Kit
  • New technology surface treatment, fine polishing
  • PVC handle, anti-skid
  • With the dies of 22 mm/0.9 inch, 27.5 mm/1.1 inch, 34 mm/1.3 inch, 43 mm/1.7, 49 mm/2.0 inch, 61.5 mm/2.4 inch

Hydraulic Tube Expander and flaring tool kit

(Apply for soft copper tube, aluminum or other soft tubes,)
  • Threaded: Horn Shaped
  • Material: Steel
  • Punching range: 5-22 mm / 3/16" - 7/8"
  • Imperial Standard: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"
  • Metric Standard: 6mm, 10mm, 12mm, 16mm (=5/8), 19mm (=3/4), 22mm
  • Package size: 42 x 34 x 9 cm/ 17 x 14 x 4 inch
  • Gross weight: 6.3 kg / 13.9 lb

Package Content

  • 1 x Hydraulic Dilator
  • 1 x Scraper
  • 1 x Cutter
  • 6 x Double Hole Splint
  • 8 x Expander
  • 1 pair of Gloves

Pipe Cutter

Put the tube between 2 rows of bearings on tube cutter. Forward the cutter blade in clock wise and keep rotating hand till the tube is cut off.

Flare- Deburrer

Put the duburrer blade inside the tube and totate ut ub clockwise to remove burrs on tube ends.

Double Hole Splint

Imperial Standard: 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8

Metric Standard: 6 mm, 10 mm, 12 mm, 16 mm (= 5/8), 19 mm (= 3/4), 22 mm

Prepare Before Making Flare

Cut the tube.

Put the duburrer blade.

Put on a nut.

MAKING FLARES

Step 1

Choose a two holes clamp corresponding to tube size. Open the clamp and put the tube in it. The end of the tube should be approx 1mm higher than the clamp. close and tighten the two holes clamp.

NOTE: put a nut on the tube before starting flaring or expanding.

Step 2

Backward the fixing rod anticlockwise before putting the two holes clamp in the yoke. Put the two holes clamp on the yoke until it reaches the bottom, as shown in the figure. Then tighten the fixing rod.

Step 3

Put the flaring cone on the center of the grooved piston as shown in the figure. Turn on the hydraulic valve by rotating the knob clockwise. After flaring work is finished, release the hydraulic valve . Then release the fixing rod. Take the tube with two holes clamp out of yoke.

Step 4

Prize up the two holes clamp with a scrwodriver from the gap then take the flared tube out.Work finished.

Tube Expanding

Step 1

Choose a two holes clamp corresponding tube size.open the clamp and put the tube in it. The end of tube should be higher than the clamp(for 5mm~22mm tubings, they should 8mm~18mm higher than clamp).close and tighten the two holes clamp.

NOTE:put a nut on tube before starting flaring or expanding.

Step 2

Backward the fixing rod in anticlockwise before put the two holes clamp in yoke.put the two holes clamp on yoke, then tighten the fixing rod. Put the expander head on the center of grooved piston as shown in figure. Turn on the hydraulic valve by rotate the knob in clockwise.

NOTE:align the expander head at tube center when expanding.

Step 3

After expanding work is finished,release the hydraulic valve by rotate the knob in anticlockwise. Piston with expander head will retract. Then release the fixing rod. take the tube with two holes clamp out of yoke.

Step 4

Prize up the two holes clamp with a scrwodriver from the gap then take the flared tube out. Work finished.

 

 

 

 

 

    Return Policy 

• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.

      Feedback

• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.