Aftermarket High premium Quality
Electrical Connector
(Pigtail Wire Harness) S1780
for
Exhaust Gas Recirculation Valve
(EGR VALVE)
Quantity: 1 Piece
==============
Part#
EGV1273
=======
Cross-Reference
LFHJ20300
LFHJ-20-300
EGV1273
=========
Specifications
| Connector
Gender |
Female + Male |
| Connector
Quantity |
1 |
| Terminal
Gender |
Female |
| Terminal
Quantity |
6 |
| Terminal
Type |
Blade Terminals |
| Wire
Quantity |
6 |
======================
Fits:
| MAZDA |
3 |
2012-2013 |
| MAZDA |
5 |
2012-2015 |
====================================================
Exhaust Gas Recirculation Valve (EGR)
What It Does:
The EGR Valve’s purpose is to control exhaust emission levels emitted from
the combustion chamber. This is achieved by re-circulating exhaust gases obtained after the
combustion chamber into the intake manifold. This inert gas takes the place of oxygen that
would normally enter the combustion chamber thus cooling the temperature of the
combustion event. The EGR Valve is the “gate” that allows this flow.
Location: The EGR Valve is located on the engine block or intake manifold
Failure Symptoms: Malfunction Indicator Light (MIL) illumination, failed emission test,
rough engine idle, no idle condition, engine hesitation, surging
==================================
|
|
|
|
|
Made In Japan Nippon Denso USA Mexico