Exhaust Gas Recirculation Valve (EGR)
With
6 Wires Electrical Connector
(Pigtail Wiring Harness) S1788
Quantity: 1 Piece
==============
Part#
MR578913
========
Cross-Reference
EGV913
EGR4300
EGR2250-021
EGR2641
226572
4F1851
=======
Specifications:
| Connector Gender |
Female |
| Connector Quantity |
1 |
| Connector Shape |
Rectangular |
| EGR Valve Type |
Linear |
| Gasket or Seal Included |
No |
| Mounting Hole Quantity |
2 |
| Terminal Gender |
Male |
| Terminal Quantity |
6 |
Electrical Connector Included
============================================
| MITSUBISHI |
ECLIPSE |
2006-2012 |
| MITSUBISHI |
GALANT |
2004-2011 |
| MITSUBISHI |
LANCER |
2004-2009 |
| MITSUBISHI |
OUTLANDER |
2004-2006 |
|
|
|
=============================================
Exhaust Gas Recirculation Valve (EGR)
What It Does:
The EGR Valve’s purpose is to control exhaust emission levels emitted from the combustion chamber. This is achieved by re-circulating exhaust gases obtained after the combustion chamber into the intake manifold. This inert gas takes the place of oxygen that would normally enter the combustion chamber thus cooling the temperature of the combustion event. The EGR Valve is the “gate” that allows this flow. Location: The EGR Valve is located on the engine block or intake manifold Failure Symptoms: Malfunction Indicator Light (MIL) illumination, failed emission test, rough engine idle, no idle condition, engine hesitation, surging
=================================================================
Repair tips:
Allow engine to cool before attempting replacement to avoid personal injury and fastener damage
If trouble code indicates insufficient flow, clean intake manifold passages
============================================================