Black U disk contains software and installation instructions. It must be installed online before it can work offline.
Notice:
1. This Offline Work Station works with KT200 Full Version Only.
2. If you have KT200 Basic Only, please contact us to pay $250 to update to Full Version, then you work with the Offline Station too.
3. Default shipping is post service which will take 12 working days around.
KT200 Offline Work station Manual:
1. Plug in the device (black disk), run the setup, and install the KT200 Software
2. After installing the KT200 Software, make sure the C drive has a capacity of 15G or more.
3. Make sure you have enough space to run the installation of KT200_ftp.
4. After completing the installation, insert the white dongle and run the KT200.exe program to complete the first update activation.
5. Complete the activation and open the Software.
Offline USB dongle Version Please Note:
1.Please be informed: even with the USB dongle, your KT200 still need to connect to the KT200 online server once every 15 days.
2.It is only suit for the full version KT200. Basic version can't use offline workstations.
3.The black is the U disk, and the white is the dongle. Black U disk contains software and installation instructions. It must be installed online before it can work offline.
KT200 offline workstation:
ECUHELP KT200 offline workstation. No need to connect to internet. Just plug the USB dongle (as shown), the KT200 reads and writes the ECU /TCU via OBD/Bench/Boot/BDM/Jtag as perfectly as KT200 online version.
KT200 offline workstation is friendly for the outdoor ECU tunning where the internet is not accessible or the signal is too weak to connect. KT200 offline workstation makes ECU tunning easier.
How to install:
1.Plug in the device, run the setup, and install the KT200 software.
2. After installing the KT200 software, make sure the C drive has a capacity of 15G or more.
3.Make sure you have enough space to run the installation of KT200_ftp.
4.After completing the installation, insert the dongle and run the KT200.exe program to complete the first update activation..
5.Complete the activation and open the software
