PLEASE BE SURE TO READ THROUGH TO THE BOTTOM OF THE PAGE BEFORE PURCHASE
ITEM DESCRIPTION:

SUPERMICRO
MOTHERBOARD
PDSMI+
REV 1.10
INCLUDES: BOARD ONLY


MBD-PDSMi+-B
  • PDSMi+ (Bulk Pack)
 
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12.0" width x 9.6 " length , (30.5cm x 24.4cm), 6 layer PCB
 
Processor/Cache
CPU
  • Single LGA775 ZIF Socket
  • Supports a Quad-Core Intel® Xeon® 3200 series processor
  • Supports a Dual-Core Intel® Xeon® 3000 series processor
  • Supports a Quad-Core Intel® Core™2 Extreme series processor
  • Supports an Intel® Core™2 Quad series processor
  • Supports an Intel® Core™2 Duo series processor
  • Supports an Intel® Pentium® processor E2000 series
  • Supports a Dual-Core Intel® Pentium® D processor
  • Supports an Intel® Pentium® Extreme Edition processor
  • Supports an Intel® Pentium® 4 processor
  • Supports an Intel® Celeron® processor E1000 series
  • Supports an Intel® Celeron® processor 400 series
  • NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
System Bus
  • 1066 / 800 / 533 MHz system bus
 
System Memory
Memory Capacity
  • Four 240-pin DIMM sockets
  • Supports up to 8 GB of memory (Single / Dual Channel)
Memory Type
  • DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1 GB, 2GB
Memory Voltage
  • 1.8V only
 
On-Board Devices
Chipset
  • Intel 3000 (Mukilteo-2) chipset
  • ICH7R + PXH-V + Intel® 82573V + Intel® 82573L
Serial ATA
  • Intel® ICH7R SATA2 (3 Gbps) controller built-in
  • Intel:
    RAID 0, 1, 5, 10 support (Windows Only)
  • Adaptec:
    RAID 0 (Two, three, four drives only)
    RAID 1 (Two hard drives only)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • (Optional: AOC-IPMI20-E)
Network Controllers
  • 1x Intel® 82573V Gigabit PCI-Express Ethernet
  • 1x Intel® 82573L Gigabit PCI-Express Ethernet
  • Supports 10Base-T, 100Base-TX, 1000BASE-T, RJ45 output
VGA
  • On-board ATI ES1000 16MB graphics
Super I/O
  • Winbond 83627EHG chip
Clock Generator
  • CK410
 
Input / Output
Serial ATA
  • Four Serial ATA ports (3 Gbps performance)
  • Four SATA hard drives supported
IDE
  • One EIDE channel supports up to two UDMA IDE devices
  • IDE Master / Slave 2 ports
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
  • White Connector for Compact Flash (CF, 40-pin IDE connector) card only
Floppy
  • 1 Floppy controller; 1.44 MB
LAN
  • 2x RJ45 LAN ports
USB
  • Up to 6x USB 2.0 compliant / 1.1 compatible ports
  • 4x Internal USB headers
  • 2x Rear USB ports
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x Header
Parallel Port
  • 1x ECP / EEP Parallel Header
Chassis ( Optimized for PDSMi+ )
4U / Tower
  • SC743i-645
Important Note
  • To ensure system stability, a ATX power supply w/ 4A (minimum) on 5V Standby is required
  • Only Supermicro 1U chassis is recommended for 1U Building Block Solutions
 
Expansion Slots
Universal Slot
  • 1 (x8) PCI-Express Slot (via Riser Card) OR
  • 1x 64-bit PCI-X 133MHz Slot (via Riser Card)
PCI
  • 1x 32-bit 33MHz PCI (3.3V) slot
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with Phoenix BIOS®
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3 support
  • PCI 2.2
  • ACPI 1.0
  • USB Keyboard support
  • SMBIOS 2.3
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • SuperDoctor III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI/APM Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Power-on mode control for AC power loss recovery
  • Internal / External Modem Rign-on
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT)
  • CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
  • Adjustable CPU clock frequency ratio
FAN
  • Fan Speed Control
  • Total of six 4-pin fan headers
  • 6x fans with tachometer monitoring
  • Status monitor with firmware speed control
  • Low noise fan speed control
  • Status monitor for on/off control
  • Support 3-pin fans (without speed control)
  • Pulse Width Modulated (PWM) fan connector
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor (TM2) Support
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
  • Suspend-state indicator LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
OS Compatibility

• Please see our OS Compatibility Chart
 
Regulatory
FCC
  • Passed to meet FCC standard requirement


ITEM CONDITION AND NOTES:
  • THIS ITEM IS REFURBISHED, SEE NOTES
  • PLEASE DOUBLE CHECK YOUR COMPATIBILITY BEFORE YOU BID
  • THE TERMS NEW, USED, ETC, REFER TO CONDITION, NOT PRODUCT AGE
  • INTERNAL CODE: 841 GS2-2

PLEASE READ BELOW BEFORE PURCHASING!!
PAYMENT MUST BE RECEIVED WITHIN 7 DAYS OF THE END OF THE AUCTION
PLEASE CONTACT US WITH ANY QUESTIONS ABOUT THE ITEM BEFORE MAKING THE PURCHASE
PLEASE CONTACT US WITH ANY ISSUES BEFORE LEAVING FEEDBACK
WE ONLY SHIP INTERNATIONALLY THROUGH THE GLOBAL SHIPPING PROGRAM

PA RESIDENTS MUST PAY 6% SALES TAX ON ITEM & SHIPPING

WE HAVE BEEN IN BUSINESS FOR OVER 25 YEARS, VISIT OUR STORE FOR ALL OF YOUR OTHER NEEDS!

SHIPPING

WARRANTY

PAYMENTS

RETURNS

All items are shipped via USPS, unless otherwise noted.

Shipping rates are supplied within the auction, and are based on weight, size, and your location.

Local pick-up is FREE!  Please arrange for this BEFORE bidding.

Small items are packed in padded envelopes, and large items in boxes with packing material.

Items returned to sender will require additional payment to re-ship.

Multiple item purchases are typically eligible for a combined shipping discount.

Shipping and Handling includes insurance.

All items come with a 30 day DOA (dead on arrival) warranty, except AS-IS items (by listing or law).

All DOA claims must be made within 30 days from the item delivery date.

Items listed with additional manufacturers warranties require dealing direct with the manufacturer for ALL warranty claims.

Items returned for warranty will be replaced with an identical item.  If item is not in stock, a refund will be issued.

All returned items will be tested, and serial numbers verified within our database.

If an item is returned as DOA or NON-WORKING, and it is found to be functional, a 20% re-stocking fee will be applied and return shipping will be charged.

Please do NOT pay for an item until you are sure you will be completing the purchase.  Purchases that are requested to be to be cancelled after a payment has been made, will be subject to a 15% processing fee.

Any payments other than standard PayPal or Credit Card, will be held for up to 15 days to "clear" before shipment.

We will only ship to the confirmed and verified address on your payment account.  No exceptions!

All returned or rejected payments are subject to a $35 administrative fee.

Items are normally shipped within 1 business days after payment has cleared, unless otherwise noted.

Any overpayment for shipping or multiple items will be credited back to the payment account.

Consult the auction for details on the return policy specific to your item.

Items that are unopened, unused, undamaged, and in original packaging may be returned within 30 days of delivery date.  Unless otherwise noted. Sealed items must still be sealed.

Software, Video Games, Music, Movies, batteries, and AS-IS items cannot be returned.  No exceptions!

A 20% restocking fee will apply to all returned items that are not covered under the DOA warranty or due to a mistake made by CSACOM

Shipping, handling, and insurance of returning an item is the buyer's responsibility.

See warranty section to the left for more information on returns.

SHIPPING

WARRANTY

PAYMENT

RETURNS