Comments: Affordable and attractive way to display your collectables. Extremely versatile and will work with the vast majority of collectable daggers, axes, swords and spears. Wood veneer, not hardwood as most Sellers list it, but nice and very durable. See my Seller ratings and buy with confidence, plus I ship fast!

Assembly: Display Plaque includes 20 pre-drilled holes on the back side. Chose which holes work best to display, then screw the two L shaped rubber-tipped fixture screws into the appropriate pre-drilled holes on the BACK of the display, just enough to punch small pilot holes on the front side. Then remove and reinsert screws through the FRONT side pilot holes. Don’t screw in too far until you see if the sword will fit over the fixture screws. You may also drill the pilot holes through from the front side with a matching drill bit size.