| Type |
Basic Type |
Multi Function Type |
Oil/Water Compatible Type |
| Model |
BF200 |
BF400 |
BF500 |
BF600 |
| Performance |
| Temp. Setting Range |
-20.0 to 100deg.C |
0 to 200deg.C |
| Operating Temp. Range |
Room Temp. +5 to 80deg.C |
Room Temp. +5 to 180deg.C*1 |
| Temp. Control Accuracy |
±0.05 to 0.1deg.C |
±0.02 to 0.05deg.C |
±0.05 to 0.2deg.C*1(*1 Condition: Setting Temp. 100deg.C, Testing Bath BZ100D, Silicon Oil Stickiness 50cst) |
| Components |
| Stirrer |
Propeller Stirring |
Water Jet Stirring |
Propeller Stirring |
| Heater |
Stainless Pipe Heater |
| 1.0kW |
1.2kW |
| Temp. Control System |
PID Control by Micro Computer |
| Temp. Setting |
Digital Setting by Key |
| Temp. Display |
Digital Display by Green LED |
| Min. Digit Indication: 0.1deg.C |
Min. Digit Indication: 1deg.C |
| Setting Temp./ Measured Temp. Changeable |
Indicated on Main Indicator(Sub-indicator: Indicate Setting Temp.) |
| Timer |
Nil |
1min. to 99h.59min. or 100h. to 999h. |
| Timer Resolution |
Nil |
1min. or 1h. |
| Operating Function |
Fixed Operation |
Fixed Operation: Continuous Operation by Set Temp., Quick Automatic StopProgramming Operation: 1 to 3 Optional Pattern, Max. 5 Segment Pattern (Repeating, Gradient Operation) |
| Additional Function |
Temp. Pre-setting(Memory/Recall 1Temp.) |
Temp. Pre-setting (Memory/Recall 10 Temp.)Timer Function (to 49,999h.), Key Lock Function, Water Jet Strength Changeable Function (10 steps Changeable) |
| N/A |
Pump Jet Angle Changeable |
N/A |
| N/A |
N/A |
Temp. Output (10mV/deg.C),External Alarm Output,Time –up Output, External Communication Function (RS422A) |
N/A |
| Heater Circuit Control |
Triac Zero-cross Type |
| Sensor |
Thermister |
Pt Sensor |
| Safety Device |
| Safety Countermeasure |
Shelf Diagnosis Function (Automatic Overheat Prevention, Abnormal Temp. Sensor,Heater Wire Broken*2, Triac Short Circuit*2, Main Relay Defect*2), Circuit Protector, Float Type Empty Boiling Preventor, Buzzer Alarm for Abnormal Condition (*2: This Function is Not Applicable for BF200) |
| Accessories |
Testing Bath Model BY100 (Polypropylene) |
| Standard |
| External Dimension |
W140 x D138 x H305mm |
| Clamp Available Thickness |
Max. 35mm |
| Power Source |
AC 100V 50/60Hz 11A |
AC100V 50/60Hz 13A |
| Weight |
Approx. 7kg |
Specifications
