*This kit includes hinges for the rear doors only!

Vertical Doors, Inc. 2005-2010 Dodge Charger VERTICAL LAMBO DOORS CONVERSION KIT

Bolt-on Vertical Lambo Door Conversion kits

When placing your order please make sure to include:
* Make 
* Model (2 door or 4 door)
* Exact Year 
* Any modifications to the body and/or the door 
* Telephone number where the shipping company can contact you..(just in case)

This system is everything you need for a successful, reliable and cost effective conversion in a minimum amount of time.

The Kit includes
Front and Rear Driver and Passenger Side Direct Bolt-on Lambo Door Hinges.
2 X Heavy Duty German made Gas shocks (Pressurized for your specific automobile)
Hardware Kit (Nuts and Bolts)
Detailed Installation Instruction

The kit Features:
Heavy duty constructions
Easy installation
Fully reversible (most cars)
Heavy Duty German made shocks (Beware of other sellers using low quality shocks)
Direct bolt on construction
Made by Vertical Doors, Inc.

When the rear door kit is installed you will need to open the front doors first in order for the rear doors to be opened. If the front doors are closed and you open the rear door you have a chance of the VDI hinge hitting the front door. Please take this into consideration when purchasing the rear door kit. 


Item: US MADE AND PATENTED Vertical Doors Inc. Bolt-on Lambo Door kit.(unless otherwise stated in the body of the listing)
Make: Dodge 
Model:  Charger
Year: 2005-2010
Trim rear doors only 
Notes: Direct "Bolt On" hinge kit / Mounts to Factory Bolt Pattern /
Manufacture: Vertical Doors, Inc.
Shipping: FREE SHIPPING LOWER 48 ONLY; Shipping to Hawaii, Alaska, less travel areas or any country outside of the US will have additional shipping charges applied. Contact us if you have any questions on shipping charges outside of the lower 48 states.
Kits will be shipped 7-14 business days after the payment has been received and it will take an additional 1-5 days in transit depending where the kit is being shipped to.

 

HERE ARE A COUPLE OF TECH TIPS

• Do not take Door off during installation Please follow the detailed instruction manual step by step 
• Use 2" painters tape to mark the factory location of your door on the horizontal and vertical plane also measure the distance between the apron and the front edge of the door by the bottom and top hinge. 
• Make sure the mounting surface is flat as possible, if anything is there, grind the surface so the vertical door kit can sit and mount flat. 
• Make sure both allen screw adjustment on each system are adjusted accordingly. 
• The kit requires no modification, the kit is a bolt on, but most inner fenders must be rolled or trimmed. Make sure to trim a tittle at a time, you only need to trim enough to allow the swing arm to open and move up and down
• If you have any questions during the install PLEASE CALL US.


How to Install Lambo Doors on any 2010-2015 Camaro

Video will open in a new window
Using the App? Paste link into a browser window: