2 in 1 ESD Safe 80W Desoldering Station and 60W Soldering Iron- Desoldering Gun and Soldering Station °F /°C
Specification
Item model number | 948 |
Wattage | 80 watts |
Batteries Required? | No |
Power Source | ac |
Display Style | LED |
Product Dimensions | 9.21 x 7.95 x 5.28 inches |
Material | Plastic, Steel |
Display Type | LED |
Item Weight | 9.68 pounds |
Batteries Included? | No |
Brand | YIHUA |
Manufacturer | YIHUA |
7.95 inches x 9.21 inches x 5.28 inches. Weight: 9.68 lb
Item Description
- One Unit, Two Tools - A Good Combination of Desoldering Station(80-watt high power) and Soldering Station (60 watts). And it's compact with user-centric design features - Sleep Function; Digital Temperature Correction; Celsius/Fahrenheit Display.
- Intelligent Heat Control - Upgraded with Precision PID Temperature Control. The program can track the actual temperatures of both desoldering gun and soldering iron rapidly. Then provides real-time correction. The compensation speed is vastly superior to similar products. This allows for minimal temperature error to achieve the essential stability.
- Intelligent Detection Mechanism - The station can self detect its part's status or change and send you the information. Automatic identification aside, the machine provides messages like "S-E" (meaning the sensor part is faulty), "Pht"( indicating the station is preheating the gun properly ). Coupled with available replacement, you can keep track of its status or give it a timely resolution.
- How To Use Desoldering - The station will preheat for around 5 minutes when turned ON, and beep 3 times when the station is ready to go. Pulling the trigger during preheating will trigger protection code 'Pht', the vacuum pump is turned OFF by default during preheating. This allows the station to heat the internal desoldering mechanism sufficiently to provide better heat transfer and quicker recovery time. So, the desoldering gun won’t clog up due to misuse under insufficient heating.
- Choose YIHUA with confidence- this product includes quality accessories and tools to provide an optimal experience for your work. 12-Month USA-exclusive Warranty. Plus, our team is providing professional assistance 24/7 right on Amazon. Questions and Suggestions are welcome. NOTE: Spare parts are readily available in this store. This model works on 110-127V with its USA plug. CAUTION: MUST NOT be plugged directly into a 220V~240V electrical outlet
Product Description
The YIHUA 948 Desoldering & Soldering 2-IN-1 station combines a desoldering station with a soldering station
The package includes:
1 x YIHUA 948-I Desoldering Station
1 x Detachable Desoldering Gun
1 x Detachable Soldering Iron
1 x 100% Metallic Holder (fits iron + gun)
3 x Desoldering Nozzles (Ø0.8/1.0/1.2mm)
2 x Filter Springs
1 x Set of Cleaning Pins
1 x Set of Rubber Retainers
1 x Heat-Resistant Silicone Pad
1 x Additional Filter Chamber
10 x Carbon Filter
Desoldering StationAdjustable Temperature: 716~896°F Temperature Stabilization: via PID Temp. Control Sleep Mode: 5, 10, 15, 20, 30 mins Adjustable | Soldering StationAdjustable Temperature: 392~896°F Temperature Stabilization: via PID Temp. Control Sleep Mode: 5, 10, 15, 20, 30 mins Adjustable | 2-IN-1You can use either the Soldering Station or the Desoldering Station based on your work, both the soldering iron and the desoldering gun connects to the station via a contact safe receptacle. |
Pump Powered SuctionVacuum Pressure: 0.5Mpa (measured from nozzle) Vacuum Pump: Activated via Trigger (available after 3-minute preheat) Desoldering: Suitable for double sided PCB through-hole desoldering, not applicable for components with square pins and computer PCB. | Better desolderingThe station will preheat for around 5 minutes when turned ON, and beep 3 times when the station is ready to go. This allows the station to heat the internal desoldering mechanism sufficiently to provide better heat transfer and quicker recovery time. So, the desoldering gun won’t clog up due to misuse under insufficient heating. | Sleep ModeThe station enters sleep mode when non-use is detected for longer than the set timer duration, and the desoldering gun/soldering iron idles at a lower temperature to reduce unnecessary wear on the nozzles/iron tips and the heating elements. You can set the timer from 1~99 minutes based on your needs, or set the timer value to 0 to turn OFF this function. |
Specifications
Rated Voltage | 110V 50hz |
Rated Power | 90W |
Temp. Range (Soldering) | 392~896°F |
Temp. Range (Desoldering) | 716~896°F |
Power Switch | Soldering / Desoldering Toggle Switch |
Dimensions | L234xW202xH134mm ±5mm |
Tip to ground resistance | <2 Ω Ohms |
Vacuum Pressure | 0.05MPa |
Digital Display | LED |
Category | 3-IN-1 Multi Station | 4-IN-1 Multi Station | Soldering Iron Tips Set Compatible with YIHUA 948 Upgraded | Soldering Iron Replacement Compatible with YIHUA 948 Upgraded | Desoldering Nozzles Set Compatible With YIHUA 948 & YIHUA 948-II Desoldering Station | Desoldering Gun Replacement Compatible With YIHUA 948 & YIHUA 948-II Desoldering Station |
---|---|---|---|---|---|---|
Functions | Hot Air Rework, Soldering, DC Power Supply | Through-Hole Desoldering, Soldering, Hot Air Rework, IC Extraction | ||||
Temp. Range (Hot Air) | 212~896°F | 212~896°F | ||||
Temp. Range (Soldering) | 392~896°F | 392~896°F | ||||
Other Parameters 1 | Power Supply: Outputs 0-15V / 0-3A | Desoldering Temp.:716~896°F | ||||
Other Parameters 2 | Power Supply: Tests DC 0-35V | IC Extraction: 4 Suction Pad Sizes | ||||
PID Temperature Stabilization | ✓ | ✓ | ||||
Temperature Calibration | ✓ | ✓ | ||||
AUTO/MANUAL Hot Air | ✓ | ✓ |
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.