Most older CNC machines have very small memory, which will make loading the program into memory often to use different small programs, or have the option to drip the program "DNC function" . The transmission of the program to the CNC machine is through the RS232 port on the CNC machine

The traditional DNC solution uses a computer with specialized DNC software installed (such as CimcoEdit, DosteskDNC, ProDNC…) to stream the machining program to the CNC machine. This solution has some disadvantages as follows:

- Placing a set of computers near the CNC machine occupies the workshop area. Power cord & rs232 cable will be very troublesome for CNC machine work place
- Manipulating the computer takes a lot of time and many stages (starting the computer, starting the software, installing, selecting ...).
- Computers sometimes malfunction or are attacked by viruses, causing work interruptions, reducing productivity.

With the above disadvantages of the traditional solution, we have researched to integrate the most necessary functions with the goal of compact product and optimized operation, in order to improve productivity and economy in the future. In the process of using CNC machines, the product DNCdevice – The transmission program for CNC machines was born.

MICRO DNC 2C a portable DNC device. they can transmit - receive or drip programs to the cnc machine (of most popular cnc machine control systems FANUC, HAAS, OKUMA, YASNAC, MITSUBISHI...) from internal memory (4GB) or from Large capacity USB stick.through the RS232 communications port, Extension of file name supports: *.?NC, *.TXT,*.NC, *tap

• simulate the toolpath in the program
• connect to computer via WIFI network to receive/send programs to computer, display NOTICE from central room, or receive SEND command from control room
• 4GB internal memory, or can be replaced by yourself with a large capacity memory card inside the box
• Copy between USB stick and internal memory in MICRO DNC 2
• has screen sleep function to increase screen life
• with built-in memory pages for basic instructions for using the device. you can see on the screen of the MICRO DNC 2. or the accompanying manual is stored in the memory, you can copy it to a USB to read and install the software (WIFI connection software) on the computer.
• you can view and edit the G-code program directly on your device's screen
• There is a virtual keyboard for you to edit, or you can use the keyboard plugged into the USB port to type on the computer keyboard
• can create a new simple program on the screen of the MICRO DNC 2 and save it in memory
• delete or reformat the program in memory or USB
• Package includes MICRO DNC 2 x rs232 cable and 24VDC adapter. (complete to use)