5.38 ft. Dallas Retro Window & Entry Awning, Terra Cotta - 44 x 24 in.

The DALLAS RETRO open-sided slope awning by . The Dallas Retro has a full load-bearing frame underneath and it has been engineered and tested to withstand heavy wind and snow loads. Many have a partial frame (U-shaped arms and front bar and fabric channel at the top). Most will collapse and rip away from your home in gusty wind conditions. DALLAS RETRO testing included extreme wind tunnel up/down draft, obstacle and weight positioning. Installation is as easy as installing a few wall brackets, setting the awning into the brackets and tightening. The frame is with structural aluminum and stainless steel hardware. The DALLAS RETRO canopy is made from Beauty-Mark Docryl Acrylic Fabrics, woven from 100% solution dyed acrylic anti-microbial yarns and treated with UV and water resistant coatings.

• Dallas Retro Window & Entry Awning
• 100% solution dyed acrylic fabric; fade, water, soil and mildew resistant
• Structural aluminum Frame
• Commercial/Residential application
• Engineered for heavy wind and snow loads
• Modular but commercial grade
• Made in USA
• Patented and Patented pending
• Easy to assemble and install
• 5 Year limited warranty

• Electric drill, adjustable wrench, philips and hex screw drivers, tape measure, ladder and level. Installation anchors are not included.

• Color: Terra Cotta
• Wide: 5.38 ft.
• Size: 44" H x 24" D
• Assembly Required: Yes
• Awning Application: Door & Window
• Awning Installation Type: Outset
• Awning Style: Slope
• Awning/Canopy Material: Solution dyed acrylic
• Commercial / Residential: Commercial / Residential
• Flexible Pitch: No
• Frame Finish: Silver
• Frame Material: Aluminum
• Hardware Included: No
• Minimum Clearance Requirement: 84"
• Minimum Mounting Height: 84"
• Mounting Space Required: 4"
• Mounting Type: Wall
• Retraction Type: Fixed
• Rust Resistant: Yes
• Striped: No
• Water Resistant: Yes
• Style: Open ended slope awning
• Weight: 24 lbs