Highlights:

• Made In Germany.
• ARMLOCK: The cross-legged jaws guarantee maximum stability for suspending the jaws in the slider.
• GLIDE & FIX: The improved geometry guarantees quick and easy movement of the jaws on the cross-beam.
• QUICK ADJUST: The knurls (red knobs) allow the jaws to be quickly released and moved on the cross-beam without the need for tools.
• Includes standard and narrow jaws.

The Kukko 40mm - 200mm 2 & 3 Arm Bearing Puller Set with Quick Adjust & 2 Jaw Types is perfect for pulling off transmission gears, bearings, pinions and synchronizer bodies.

Features:

• This set contains the basic equipment for the 2- and 3-arm pullers needed in every workshop. Additionally the set is now equipped with two pulling hook variants.
• The extensions included can increase the pullers‘ clamping depth up to max. 600 mm (2-arm puller 600 mm and 3-arm puller 450 mm).
• Two arm version for space-saving work. Three arms ensure even load distribution for an especially securehold on the part to be pulled.
• In any position it is used, this model‘s design allows parallel pulling hooks, even under a full load.
• The part to be pulled lies only on the support surfaces of the pulling hooks and is pulled off gently.
• The cross-bar of the 2-arm puller has a hexagonal profile, allowing use of a wrench for counterholding, when needed.
• The spindle heads have a band that prevents the wrench from slipping off during the pulling process.
• In the approved KUKKO-L-Boxx system. With a new front handle for superior portability.
• Tipp: The hydraulic spindle 8-01 can be purchased to use the extractor with the standard hooks.

Kukko Advantage:

• Strong construction, high performance and long service life make it ideally suited for use in the commercial vehicle sector.
• By turning the pulling hooks, the pullers can be used both externally and internally.
• A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench.
• Turning the pulling hooks enables them to be used both internally and externally.
• Variable reach thanks to optional jaw extensions.

Specs:

• Spread: 40mm - 200 mm (1 ³⁷/₆₄ -7 7/8 inch) [Note: this is correct, not the image specs]
  
• Spread used internal: 100 - 260 mm (3 7/8 - 10 1/4 inch)
• Depth: 150 - 600 mm (5 7/8 - 23 5/8 inch)
• Hexagon drive (male): 22 mm (7/8 inch)
• Maximum load: 10 ton [Note: this is correct, not the image specs]
  
• Length of spindle: 355, 220 mm (14, 8 5/8 inch)
• Maximum torque: 150 Nm (110.5 ft lb)
• Weight: 12.85 kg
• Number of jaws: 3

What's included: (SKU and Item Name)

• 621220 Mechanical pressure spindle.
• 621355 Mechanical pressure spindle.
• 2-152-P 2 quick adjusting jaws (pair)
• 2-153-P 2 narrow, quick adjusting jaws (pair)
• 2-302-P 2 quick adjusting jaws (pair)
• 2-V-150-P 2 jaw extensions (pair)
• 699915 KUKKO Special grease for pressure spindles
• 20-20-T 2-jaw cross bar
• 30-20-T3 3-jaw cross bar
• 600-17 Pressure pad bricks
• 20-30-T 2-jaw cross bar