Be confident in your purchase, we're an Authorized Kukko Dealer!
Highlights:
  • Made In Germany.
  • For removing large bearings, gears, discs, etc.
  • SWITCH: A two-sided spindle tip provides optimal adjustment of the spindle to the shaft.

If you need to remove larger bearings, gears, discs you're going to want the Kukko 80 - 520mm 2 arm Bearing Puller. It has the size you need, and the strength you'll want to get the job done.

Features:

  • High performance.
  • Standard pulling hooks with adjustable depths.
  • Parallel pulling hooks in every position, even with full load.
  • Pulling hooks with infinitely variable adjustment on the cross-beam.
  • Mechanical pressure screw.
  • Milled thread treated with special coating.
  • Two-arm design for space-saving operation.

Kukko Advantage:

  • Pulling hooks can be adjusted lengthwise to meet the required clamping depths.
  • Turning the pulling hooks enables them to be used both internally and externally.
  • Suitable for pulling asymmetric workpieces.
  • Spindle head band prevents the wrench from slipping off.
  • Almost all components available as replacement parts, time-saving order process thanks to numbering system.
  • Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option.
  • Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
  • Quality made in Germany.
  • Strong design, high performance and long service life.
  • Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
  • Safety label to ensure protection of intellectual property.
  • A tube of KUKKO special grease included for pressure spindle.

Specs:

  • Spread: 80 - 520 mm (3 3/16 - 20 1/2 inch)
  • Depth: 300 - 500 mm (11 7/8 - 19 3/4 inch)
  • Spread used internal: 200 - 590 mm (7 7/8 - 23 inch)
  • Hexagon drive: (male) 36 mm
  • Maximum load: 12 t (12 US t)
  • Maximum torque: 400 Nm (295 ft lb)
  • Weight: 20.74 kg
  • Space below: 25 mm (1 inch)
  • Space next to it: 85 mm (3 3/8 inch)
  • Number of jaws: 2

What's included: (SKU and Item Name)

  • 633500 Mechanical pressure spindle.
  • 4-SP-P 2 pulling jaws with adjustable length (pair)
  • 20-4-T 2-jaw cross bar

Read Before Buying:
-This item is intended for professional technicians. Please make 100% sure this is the item you need before purchasing.
-This item is covered under the manufacturers warranty for defects. However, returns (for any reason) are NOT accepted.