Multifunctional 3D printing filament storage box
Moisture and Dustproof
Sealed protection, dustproof, built-in dedicated slot for desiccant bag,
convenient for recycling, with non-slip foot pad.
Method of Use
Step 1、Plug the adapter into the AC100-240 50/60Hz power supply and plug the output terminal into the interface in the tail of eBOX.
Step 2、Press button to start the weight will be automatically cleared. Then enter the WOC mode to set the plate weight, More details refer to "Weight setting mode"......
Step 3、Open the upper cover, put the desiccant into the empty slot in the rear of the box, than put the spool in.
Step 4、Put the spool in and pull the filament out through the outlet close the cover (The direction to pull filament can be bottom-up, or from top to bottom depending on the position of printer)
Reference Table for Drying Time
