• Features

  Usage	Can only be used in the EFI system network, e.g., with a Flexi Soft safety controller and an additional S300 or S3000 safety laser scanner
  Model	Sensor without system plug
  Application	Indoor
  Protective field range	7 m
  Warning field range	49 m (20 m at 20 % reflectivity)
  Distance measuring range	49 m
  Number of simultaneously monitored protective fields	≤ 4 1)
  Type of field set	Triple field sets, dual field sets
  Number of field sets	32 2) 3)
  Number of fields	64
  Number of monitoring cases	32 3)
  Scanning angle	190°
  Resolution (can be configured)	30 mm, 40 mm, 50 mm, 70 mm, 150 mm
  Angular resolution	0.5°, 0.25°, depending on range and resolution
  Response time	60 ms 4)
  Protective field supplement	100 mm
  Number of multiple samplings	2 ... 16, configurable
  Delay of automatic reset	2 s ... 60 s, configurable

  • 1) If several protective fields are monitored simultaneously, the shut-off signals must be connected to safe outputs on a Flexi Soft safety controller or routed via a safe EFI gateway.
  • 2) In dual field mode 32, in triple field mode 21 field sets.
  • 3) The performance characteristics of the Remote device correspond to those of the host. If the system exclusively consists of Remote devices connected to an EFI partner, 16 dual field sets or 10 triple field sets and 32 monitoring cases are available. For monitoring case switching static or dynamic inputs of the EFI partner have to be used.
  • 4) Depending on basic response time and multiple sampling.

• Safety-related parameters

  Type	Type 3 (IEC 61496)
  Safety integrity level	SIL2 (IEC 61508)
  Category	Category 3 (EN ISO 13849)
  Performance level	PL d (EN ISO 13849)
  PFHD (mean probability of a dangerous failure per hour)	8.0 x 10-8
  TM (mission time)	20 years (EN ISO 13849)
  Safe state in the event of a fault	At least one OSSD is in the OFF state.

• Functions

  Restart interlock	✔
  External device monitoring (EDM)	✔
  Multiple sampling	✔
  Monitoring case switching	✔
  Simultaneous monitoring	✔
  Static protective field switching	✔
  Dynamic protective field switching	✔
  Contour as a reference	✔
  Integrated configuration memory	✔
  Measured data output	Via RS-422
  Safe SICK device communication via EFI	✔

• Electrical data

  Protection class	II (EN 50178)
  Supply voltage Vs	24 V DC (16.8 V DC ... 28.8 V DC)
  Power consumption	≤ 0.8 A 1) ≤ 2.3 A 2)
  Outputs Output signal switching devices (OSSDs) 2 x 500 mA Application diagnostic outputs 3 x 100 mA 3)

  • 1) At 24 V DC without output load.
  • 2) At 24 V DC including maximum output load.
  • 3) Freely programmable, e.g. warning field, contamination, reset required.

• Mechanical data

  Dimensions (W x H x D)	155 mm x 185 mm x 160 mm
  Weight	3.3 kg
  Housing material	Aluminum die cast
  Housing color	RAL 1021 (yellow)
  Front screen material	Polycarbonate
  Front screen surface finish	Outside with scratch-resistant coating

• Ambient data

  Enclosure rating	IP65 (EN 60529)
  Ambient operating temperature	–10 °C ... +50 °C
  Storage temperature	–25 °C ... +50 °C
  Vibration resistance IEC 60068-2-6, IEC 60068-2-64, IEC 60721-3-5, IEC TR 60721-4-5, IEC 61496-3 Class 5M1 (IEC 60721-3-5)
  Shock resistance IEC 60068-2-27, IEC 60721-3-5, IEC TR 60721-4-5, IEC 61496-3 Class 5M1 (IEC 60721-3-5) Continuous shock 50 m/s², 11 ms 100 m/s², 16 ms

• Other information

  Type of light	Pulsed laser diode
  Wave length	905 nm
  Detectable remission factor	1.8 % ... > 1,000 %, reflectors
  Laser class	1 (21 CFR 1040.10 and 1040.11, IEC 60825-1)

• Classifications

  eCl@ss 5.0	27272705
  eCl@ss 5.1.4	27272705
  eCl@ss 6.0	27272705
  eCl@ss 6.2	27272705
  eCl@ss 7.0	27272705
  eCl@ss 8.0	27272705
  eCl@ss 8.1	27272705
  eCl@ss 9.0	27272705
  eCl@ss 10.0	27272705
  eCl@ss 11.0	27272705
  eCl@ss 12.0	27272705
  ETIM 5.0	EC002550
  ETIM 6.0	EC002550
  ETIM 7.0	EC002550
  ETIM 8.0	EC002550
  UNSPSC 16.0901	39121528

________________________________________________________________________________

1179