The Demonfx Ten Band Graphic EQ+BufferBooster gives players huge amounts of tone shaping and level control in a bullet-proof enclosure. This pedal has been upgraded with noise-reduction circuitry. With ten carefully chosen frequencies and input and output level controls, the Ten Band EQ will let you tune your bass or guitar rig to any room in seconds. CONTROLS 1 VOLUME slider controls overall effect volume 2 EQ sliders boost or attenuate up to ±18dB at six different frequency centers 3 GAIN slider controls amount of gain boost 4 FOOTSWITCH toggles effect on/bypass ( blue slider LEDs indicate on) DIRECTIONS • Run a cable from your guitar to the 10 EQ’s INPUT jack and run another cable from the 10 EQ’s OUTPUT jack to your amplifier. • Set all sliders to their 0dB position and depress the footswitch to turn the pedal on. • Move the VOLUME slider up to increase overall effect volume or down to decrease it. • Adjust the BufferBoost knob : =0 :clean buffer >0 : buffer and clean boost • Move PARAGRAPHIC sliders up to boost or down to cut associated frequency by up to ±12dB. SPECIFICATIONS Input Impedance 470 kΩ Output Impedance 5 kΩ Max Input Level All Sliders at 0 dB +14 dBV at 1 kHz Max Output Level All Sliders at 0 dB +14 dBV at 1 kHz Frequency Response ±1 dB, 20 Hz to 20 kHz Noise Floor* -101.4dBv Filtering ±12db at: 31.25, 62.5, 125, 50, 500, 1k, 2k, 4k, 8kHz ±12dB shelf at 16kHz Power Supply 9 Volts DC Current Draw 48 mA
|