Four screws are all it takes to attach your HDTV to the wall if you use
hanger style Shadow Mounts from Dayton Audio. These simple, strong, easily
installed hangers hold 100 lb. TVs with ease, and need less than 1/2" clearance
from the wall.
Using the included hardware and bubble level, mount the rail to your wall,
then install two hanger clips on the back of the TV and set the clips into the
rail. Quick cable connection is facilitated by the integrated kick stands that
fasten to the lower VESA mounting points on your TV. Simply flip out the kick
stands, and your TV is placed at a slight upward angle while you work. It really
doesn't get any easier than this!
Specifications:
• Mounting rail dimensions: 25.4" W x 2.3" H
• Distance
from wall to back of TV: 0.4"
• VESA sizes supported: Up to 600 mm W x 400 mm H
• Maximum weight capacity: 100 lbs.
Note: Applicable television size ranges are based on VESA standards and
will fit the listed screen sizes. To ensure that this specific TV mount is not
exposed behind your TV, identify the length and width of your specific TV and be
sure that the mounting bracket, plate, and or articulating arm does not extend
beyond your television’s measurements.