Item description for NSEE 12/24V Universal Wireless Receiver, Keypad Kit Swing Slide Gate Door Opener

Wireless Keypad used for Automatic Swing and Slide Door Openers

--This is a dual channel transmitters that are activated only after having entered a Suitable combination.

--The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code is changed at each transmission session.

--The estimated transmission range is 200 m in open space and 35m indoors .

--The units are designed to ensure battery life equivalent to an estimated 2 years of operation considering 10 transmissions/day.

Specification:

---Power:6Volt DC

---2PCS CR2032 Li battery

---Battery life:2 years(4 times operation every day)

---Frequency:433.92MHz+/-75KHz

---Transmitter power:1Mw

---Data format:standard

---Work temp:-20~+55 centidegree

---Password number:0-8

---Water proof level:1p54

---Dimension:85*75*35mm

---Weight:150g

Working voltage: 12V – 24VAC/DC
Frequency: 433.92 MHZ

Learn at least 400 codes.
1). Connect Receiver to 12V-24VAC/DC
2). When the power is initiated the POWER LED will light and the receiver is ready for instructions.
3). Press any button on the remote, if the code is learnt the LED will blink, then release the button on the
remote. Without any operation in 15 seconds, the LED will be extinguished and finish its learning status.
4). PROGRAMMING METHOD:
A. Press LEARN1 once, the LED light and the CH1 (monostable) activates, Repeat Step 3).
Press LEARN1 twice, the LED light and the CH1 (bistable) activates, Repeat Step 3).
B. Press LEARN2 once, the LED light and the CH2 (monostable) activates, Repeat Step 3).
Press LEARN2 twice, the LED light and the CH2 (bistable) activates, Repeat Step 3).
5). DELETING FUNCTION:
Press “LEARN 1” or “LEARN 2” and hold on to make the “LEARN” LED light till go out, all codes
of transmitters which had been stored are erased.
6). NOTE:
A. The data for rolling codes is relatively big and will take a little more time to operatethe remote
B. If the same code is entered more than once, only the last code is memorized.

-keypad-6 -

012 013