Riveting Hammer Square 1/2" Face for Metalwork Crafts & Jewelry Repair 7 1/2"

• This is a new metal riveting hammer
• Great for watchmakers or other light work
• One end is flat and the other is chisel shaped for spreading rivets
• Has a face that measures approximately 1/2" (12.7 mm) in diameter
• The length of the head measures approximately 3" (76.2 mm)
• The hammer measures approximately 10 15/16" (277.81 mm)

Goldsmith Hammers Bowed & Cross-Peen Silversmith Hammer Jewelry Making Tool

A goldsmith hammer with a round slightly domed polished face and a chisel shaped end fixed on a wooden handle that is well balanced. The cross peen end of the hammer can be used for forming, riveting, design texturing, and shaping, while the face end can be utilized for general purpose operations.

Drop forged and case hardened hammer. The hammer's head and work surfaces are polished and have a smooth finish.

Features:

• Hammer Length: 10-1/2" (265mm)
• Hammer Weight: 5oz.
• Hammer Head Length: 3-5/8" (92mm)
• Head Weight: 4oz.
• Face Diameter: 3/4" (19mm)
• Cross Peen Length: 5/8" (15.6mm)
• Cross Peen Width: 1/8" (3.28mm)
• Handle: Hardwood

Small Precision Hammer Set with 11 Interchangeable Heads for Gold and Silver

Features:

• 11 interchangeable heads come with this versatile hammer set.
• Suitable for a variety of jobs.
• All non-ferrous metals are suitable.

This precision hammer comes with a variety of interchangeable heads and may be used on non-ferrous metals like silver, copper, brass, gold, and aluminum.

The double head hammer may be used as a general purpose hammer as well as for generating distinctive surface textures in sheet and wire, making it excellent for jewellers, silversmiths, and amateurs alike.

This hammer is made of polished steel and wood and features a counter-balanced grip to help decrease fatigue.

It's straightforward to use: the accompanying wrench and screws may be used to swap out each head.

Details:

• Double headed hammer; handle measures 225mm long x 20mm wide and head measures 70mm long x 2mm diameter
• Ball pein head (17mm diameter x 7mm depth)
• Flat head (17mm diameter x 8mm depth)
• Rounded flat head (17mm diameter x 8mm depth)
• Narrow cone head (5mm diameter x 18mm depth)
• Wide cone head (10mm diameter x 18mm depth)
• Large curved raising head (7mm width x 17mm length x 17mm depth)
• Medium curved raising head (5mm width x 16mm length x 17mm depth)
• Small curved raising head (3mm width x 17mm length x 17mm depth)
• Large flat raising head (7mm width x 17mm length x 17mm depth)
• Medium flat raising head (5mm width x 17mm length x 17mm depth)
• Small flat raising head (3mm width x 17mm length x 17mm depth)
• Wrench