|
German SdKfz 222 light armored car
The Sd.Kfz. 222 was fitted with heavier armament and a larger turret than the Sd.Kfz. 221 but it was still comparatively cramped and lacked top protection other than a wire screen designed to allow grenades to roll off, but this made using the main armament problematic. The machine gun was mounted co-axially with the autocannon, and both weapons were pintle-mounted, and fitted with an elevation and traverse mechanism and floor-mounted firing mechanisms. The turret was rotated by the traversing weapons rather than the weapons being fixed to a traversing turret. There was thus no bearing-ring and no turret basket, only a fighting compartment largely obstructed by the breeches of the weapons. This version of the vehicle was armed with a 2 cm KwK 30 L/55 autocannon and one MG 13 machine gun; full designation was Leichter Panzerspahwagen (2 cm). The crew was increased to three by the addition of a gunner, relieving the commander of that task. In 1938, the MG 13 was replaced by an MG 34, and in 1942 the KwK 30 was replaced by the faster-firing KwK 38 of the same calibre. Production ran from 1937 to late 1943, with at least 990 vehicles produced.
This model is 3D printed and meant to be an economical alternative to wargamers wanting to expand their armies, it can also be used to build dioramas.
This model is made in nine parts, turret, hull, axles and wheels. The model will be sent with support material still attached for better safety during transport, cutting and cleaning by the buyer will be needed before assembly. The model is printed using PLA and gluing is needed, if adding accessories to it superglue type glue will be required or other epoxy glue.
The pictures are from one sample model, the models are similar in grade of detail after print cleaning. The model is dispatched in a postal cardboard box with protective material inside for better safety.
Model Specifications:
Length - 6.74 cm
Width - 3.09 cm
Height - 2.83 cm Weight - 12 g
Color - color may vary but it is usually grey or white.
If you like to have this model printed in another scale please do not hesitate in contacting us!
Please check the detailed pictures! All parts are FDM printed! All miniatures require further cleaning before painting!
We usually take up to five working days to dispatch our items! In case of any doubt please do not hesitate in contacting us!
**********
Combined shipping rates
less than 100 g - 6.42 GBP Europe, 7.04 GBP Worldwide
from 100 up to 250 g - 8 GBP Europe. 9 GBP Worldwide
from 250 up to 500 g - 10.77 GBP Europe , 14.23 GBP Worldwide
from 500 up to 1 Kg - 14.56 GBP Europe, 24.12 GBP Worldwide
from 1 Kg up to 2 Kg - 23.27 GBP Europe, 35.58 GBP DUE TO OUR CURRENT STATE OF EMERGENCY WE NEEDED TO RAISE DISPATCH TIME TO 10 WORKING DAYS.
WE WILL TRY TO KEEP OUR 5 WORKING DAYS REFERENCE BUT WILL ONLY BE ABLE TO POST ONCE A WEEK FOR SAFETY REASONS.
WE LIKE TO APOLOGIES FOR THIS AND TO ASK FOR YOUR UNDERSTANDING!
|