Push-in Eyeglass Nose Pads,Soft Silicone Air Cushion Glasses Replacement Nosepad,14mm Air Chamber/Air Bag/ Nose Piece



great spare replacement to build,creat,repair or replace on your set of sunglasses



Specification:



Size(Nose Pad):0.55in x 0.27in(LXW); 14mm x 7mm.

Thickness(Nose Pad): 3mm

Size(Installation port): 0.14in x 0.1in(LXW);3.5mm x 2.5mm.

Thickness(Installation port): 3mm

Material: Air Chamber Silicone

Color(Nose Pad): Clear

Mount Type:Push on/Snap in

Shape:Teardrop

Applicable people: Adults and Child



【Soft Material】:Made of extra soft air chamber silicone,will not pain but provides you with comfort when you wearing glasses, reducing discomfort.Lightweight,flexible and don’t have terrible smell.Will not turn yellow or hard after using for a period of time.



【Air Bag Decompression Design】:In order to reduce the burden on the bridge of the nose, a hollow design is used in the middle to effectively buffer the pressure of the glasses on the bridge of the nose. There is a small hole at the bottom of each nose pads to facilitate pressure discharge. These scientific designs effectively ensure that the bridge of the nose will not be compressed, and there will be no Ugly marks.



【Non-slip Nose Pieces for Eyeglasses 】: These nose guards for glasses are not only increase the height, but also reduce the burden effectively, help your glasses fit for your nose comfortably and steadily. The eye pad keep your glasses in place and not slide down easily, save your time in adjusting the glasses.Giving you a new eyeglasses wearing experience.



【Wide Application】: Push-in air chamber nose pads are just suitable for push in mount type of the prescription glasses, reading glasses, wire frame glasses,sunglasse,etc.These nose pads are not fit for the clip-on or screw-in mount type, please make sure that your glasses have the same type. And these nose pads do not need any tools to install, such as screws, screwdriver,etc