American Eagle Flag Black and White  Patriotic Cornhole Board Vinyl Wrap Laminated Decal Sticker Set

**MADE IN THE U.S.A.**

*Cornhole Wrap Set Includes Two Wrap Decals Sticker (BOARDS NOT INCLUDED)
*Size 24.5"x48.5" (The hole is not pre-cut)
*Air Release Vinyl - Bubble-free Application
*Laminated for added protection and durability.
*Easy Installation instructions below 
******BOARDS NOT INCLUDED******

All Cornhole Wraps are digitally printed on professional grade wrap film. This high performance wrap film has a grey removable, repositionable adhesive technology and has no visible air channels. These air channels help to eliminate bubbles during installation. These professional grade wraps will be laminated with a clear vinyl.  This laminating process provides extra protection as well as excellent UV and abrasion resistance as well as extended outdoor use. This means our graphics will stand up to the extremes of the outdoor environment, last longer and look better!  The hole is not pre-cut, this allows you to install the graphic to your board and then cut the hole out and trim the edges . These graphics are easy to apply and easy to remove, just peel of the backing, apply and trim!

We Want You To Be Completely Satisfied And Will Make Every Effort To Make Your Transaction As Smooth As Possible.
In The Unlikely Event There is an issue With Your Order, Please Contact Us And We Will Resolve Your Issue.

Thank You

INSTALLATION INSTRUCTIONS:

(1)Clean cornhole board surface of any dust or debris. (make sure surface is dry)
(2)Place cornhole wrap decal on a flat surface face down and peel off paper backing, *IMPORTANT* Avoid letting the decal stick to itself
(3)Pull slightly tight, and Lightly stick the 4 corners of the cornhole wrap decal to the desired location (this may be easier with two people)
(4)Squeegee  the decal down working from the middle out. (Try to avoid bubbles and/or creases)
(5)Trim the center hole material out along the edge of the wood with a hobby knife 
(6)Heating the cornhole wrap decal after application with a heat gun or hair dryer will aid in application