Introducing the Hole Saw Adapter from Another Amazing Product USA, designed to fit SDS Plus and accommodate hole saws up to 1 1/8 inches. This adapter comes with a TCT pilot drill and a free hex key to make the installation process even easier. With its model number ARBSDSSM, this adapter is perfect for use in drills and hammer drills, making it an ideal addition to your business and industrial needs. The bundle description includes all the necessary items for use, making it a great value purchase. This Smaller Manrel fits all our Tungsten Carbide Grit Hole Saws from 5/8" (16mm) Diameter through to our 1 1/4" (29mm) Diameter and comes with the standard 1/2" thread.
The End on this Mandrel / Arbor has an SDS fitting Also available with a 3/8" & 7/16" Hex Shank.
The main difference with these Holesaw Adapters Mandrels / Arbors is the fact that the Pilot Drills Masonry Bits That means they have Tungsten Carbide Tipped Pieces welded into the tips This means they can drill through hard abrasive products and are designed to be used with a Hammer Drill. After All whats the Point Having a Hole Saw that can cut the Tough Stuff if the Pilot Cannot?
This makes them perfect for Drilling materials like Brick, Marble and Concrete. Pilot Drills are 6mm (1/4") Diameter replaceable and available in our store. Notice our pilots have a flat milled on them so the hex grub screw can hold very secure.
Our 5/16" special Spear Point TCT Tile & Glass Drill Specifically designed 1/4" shaft to Fit all our Adapters. For drilling ceramic tiles without slipping.
These Mandrel are designed to take serious abuse and will outlast conventional tools. They can be used in Corded or Cordless Drills with or without Full Hammer Action. These Adapters were intended to be used in conjunction with our Tungsten Grit Edge Hole Saws. So they can cut Tough Abrasive and Brittle materials like Brick, Masonry, Slate, Marble, Construction Materials such as Autoclaved Cement Board, FibreGlass, Composite Boards Chipboard and MDF, Laminates, Rubber Tyres, GRP, CFRP, Hardwood Flooring, Laminate Flooring, Plasterboard / Drywall, Soft Resinous Woods and Hard Brittle Materials.
For Drilling Deep Holes, Mabdrels attach to 3/8" Hex end with Hex Screw. Extensions not suitable for SDS fitting Arbors / Mandrels We are always looking for the next Amazing Product So dont forget to You will be informed first of any new Products Designs, Instructions, Videos or Inventions etc. So What Else
Might You Need?
If you have a Tile Project to do check out
our other kits that include the Amazing Tile
& Glass Cutter plus other items like Drill
Bits for mounting grab bars and towel
rails, Hole Saws for Faucets and Shower
Head. Larger Hole Saws for Drains,
Even 7 1/4" for the Toilet Flange
Large Core Bits for Dryer Vents.
What Else
Do We Sell?
Tons,Keep Scrolling!
Some with Drill Bits, Saw Blades, Grinders
Some with Files,Jigsaws and Hole Saws
For Mounting Grab Bars, Toilet Roll
Holders, Towel Rails.
Tungsten for Wall Tile Marble & Slate.
Diamond for Porcelain, Floor Tile,
Granite Stone and Rock.
Cuts through Hardened Steel, Seized Padlocks Hardie Siding and Backer Board, Cement Block
Cast Iron, Check out Listings for full list.
Cuts through Plaster, Drywall, Hardie Board Cement Backer Board, Fiberglass
Laminate Flooring.
Check out Listings for full list.
Cuts through Plaster, Drywall, Hardie Board Cement Backer Board, FiberGlass
Laminate Flooring.
Check out Listings for full list.
Cuts through Concrete, Brick Masonry, Stucco, Plaster, Drywall, Hardie Board
Cement Backer Board, FiberGlass
Laminate Flooring. Low Density Ceramic Tile
Check out Listings for full list.
Designed for Our Tungsten Hole Saws as the Adapter Pilot Drills are TCT -
Tungsten Carbide Tipped for Masonry
but will fit any other hole saws
These Diamond Grit Edge Hole Saws are our Pro Range with Larger Diamonds than what
you would find in box stores and you will
get many holes if kept cool.
Diamond Hole Saws with no Pilot Drills can be a little tricky to start but our Diamond
Hole Saw and Core Bit Guides make it simple.
A range of Kits that offer better value Than Purchasing individual items.
Some Kits come in there own cases
Cut Deep Holes through Concrete Brick Masonry, available with adapters.
Large 1 1/4" Bore Also available for Machines
Core Bits have 5/8-11 UNC thread which allows them to screw straight
onto a regular Angle Grinder Thread
Just Add Water and they will hold 100 times
there weight in water, great for mixing in soil
to retain moisture.
|