TUYU Advanced Customization Motorcycle Helmet Chin Mount for GoPro Insta360 DJI Camera for SHOEI AGV ARAI HJC Helmet

How to install the customized chin mount
1st, find the correct position, align it, then use a toothpick to pry off a corner of the 3M glue and tear it off.

2nd, use a hair dryer to heat (30s) the 3m adhesive, align the position, and press it for 10-20 seconds.

3rd, then wait 4-5 hours before installing the camera, it will stick very firmly

Advanced Customized GoPro Helmet Chin Mount
in addition to the (generic) model,other options are dedicated to helmets with marked models. No additional brackets or straps are required after installation, and the original appearance of the helmet is maintained as much as possible. It only needs a genuine 3M sticky pads to fit tightly. The helmet will not be damaged due to disassembly and assembly, and it fits perfectly. In addition, the bracket will not block the switch of the air outlet, and the fit is firm. After the installation is complete, grab the gopro and shake the helmet without any looseness.

Note:
1.The material is made of ABS , which is much better than the quality of rubber, although more expensive, but the quality is very good, and can perfectly fit the helmet

Please use our genuine 3M sticky pads in this product, the weight capacity can be more than 5kg, do not use the cheaper fake 3M sticky

3m VHB tape ensures strong adhesion to the helmet.
Compact design, long life and high reliability. After sticking firmly, please wait for 12 hours before using, it can be more firm

Type 1: for SHOEI X-14
This type CNC aluminium customized helmet chin mount only compatible with SHOEI X-14, please select the correct option when you purchase it.

Type 2 : for SHOEI GT Air 2
This type customized helmet chin mount only compatible with SHOEI gt air 2, please select the correct option when you purchase it.

Type 3 : for SHOEI Z7
This type customized helmet chin mount only compatible with SHOEI Z7, please select the correct option when you purchase it.

Type 4: for SHOEI Z8
This typecustomized helmet chin mount only compatible with SHOEI Z8, please select the correct option when you purchase it.

Type 5 : for Arai RX-7X
This type CNC aluminium customized helmet chin mount only compatible with Arai RX-7X, please select the correct option when you purchase it.

Type 6 : for Agv K1
This type  customized helmet chin mount only compatible with Agv k1, please select the correct option when you purchase it.

Type 7 : for Agv Pista GP R(R)
This type customized helmet chin mount only compatible with Agv GPR / GP RR, please select the correct option when you purchase it.

Type 8 : for Arai Tour Cross 3
This type customized helmet chin mount only compatible with Arai Tour Cross 3, please select the correct option when you purchase it.

Type 9 : for HJC Raph 11
This type 3D print ABS customized helmet chin mount only compatible with HJC Raph 11, please select the correct option when you purchase it.


How to install the customized chin mount

1st, find the correct position, align it, then use a toothpick to pry off a corner of the 3M glue and tear it off.

2nd, use a hair dryer to heat (30s) the 3m adhesive, align the position, and press it for 10-20 seconds.

3rd, then wait 4-5 hours before installing the camera, it will stick very firmly

Advanced Customized GoPro Helmet Chin Mount

in addition to the (generic) model,other options are dedicated to helmets with marked models. No additional brackets or straps are required after installation, and the original appearance of the helmet is maintained as much as possible. It only needs a genuine 3M sticky pads to fit tightly. The helmet will not be damaged due to disassembly and assembly, and it fits perfectly. In addition, the bracket will not block the switch of the air outlet, and the fit is firm. After the installation is complete, grab the gopro and shake the helmet without any looseness.



Note:
1.The material is made of CNC aluminum alloy, which is much better than the quality of rubber, although expensive, but the quality is very good, and can perfectly fit the helmet

2. Please use our genuine 3M sticky pads in this product, the weight capacity can be more than 5kg, do not use the cheaper fake 3M sticky

3. 3m VHB tape ensures strong adhesion to the helmet.
Compact design, long life and high reliability. After sticking firmly, please wait for 12 hours before using, it can be more firm

Type 1: for SHOEI X-14

This type CNC aluminium customized helmet chin mount only compatible with SHOEI X-14, please select the correct option when you purchase it.

Type 2 : for SHOEI GT Air 2

This type CNC aluminium customized helmet chin mount only compatible with SHOEI gt air 2, please select the correct option when you purchase it.

Type 3 : for SHOEI Z7

This type CNC aluminium customized helmet chin mount only compatible with SHOEI Z7, please select the correct option when you purchase it.

Type 4: for SHOEI Z8

This type CNC aluminium customized helmet chin mount only compatible with SHOEI Z8, please select the correct option when you purchase it.

Type 5 : for Arai RX-7X

This type CNC aluminium customized helmet chin mount only compatible with Arai RX-7X, please select the correct option when you purchase it.

Type 6 : for Agv K1

This type CNC aluminium customized helmet chin mount only compatible with Agv k1, please select the correct option when you purchase it.

Type 7 : for Agv Pista GP R(R)

This type CNC aluminium customized helmet chin mount only compatible with Agv GPR / GP RR, please select the correct option when you purchase it.

Type 8 : for Arai Tour Cross 3

This type CNC aluminium customized helmet chin mount only compatible with Arai Tour Cross 3, please select the correct option when you purchase it.

Type 9 : for HJC Raph 11

This type 3D print ABS customized helmet chin mount only compatible with HJC Raph 11, please select the correct option when you purchase it.

please noted, it is not CNC aluminium, if you mind it, do not purchase it. Due to the Chinese new year holiday, the CNC aluminium type will be in stock at the end of february