Mooer Micro Preamp 003 Power Zone Guitar Effects Pedal

003 Power-Zone

MOOER micro preamps are sonically accurate digital recreations of the preamp sections of popular tube amplifiers. We have developed these by directly analyzing real tube amplifiers using a brand new technology to capture their sound, dynamics and response. Each Micro Preamp comes complete with dual channels, integrated speaker cabinet simulation and dual operating modes to suit the needs of all users.

Initially we are releasing a set of 10 models, each based on a different popular tube amplifier from a range of manufacturers. These have been designed to be used with the upcoming MOOER power amp or in the effects return of any standard guitar amplifier. The speaker cab simulation allows the user to connect direct to a soundcard, powered monitor or P.A. without the need for a guitar amp or speaker cab at all.


Features:
  • High quality dual channel preamp
  • Independent 3 band EQ, Gain and Volume controls for each channel
  • Speaker cabinet simulation on/off
  • 2 different modes for footswitch operation. On/Off or channel A/B
  • 003 is based on Koch ® PowerTone

Connection:

1.DCIN:
Connect a DC 9V 220mA centre pin negative power supply

2.INPUT:
Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

3.OUTPUT:
Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

Specifications

Specification:

  • Modes: Delay and reverb effects with tap tempo functionality.
  • Input: 1/4” mono audio jack.（Impedance: 1 meg Ohms)
  • Output: 1/4” mono audio jack（Impedance: 100 Ohms)
  • Power requirements: AC adapter 9V DC , center negative.（Highly recommend to use Mooer Micro Power.)
  • Current Draw:300mA
  • Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
  • Weight:160g
Comes with a Hot Box HB-PCW-A1 Guitar Effect Pedal REGULATED Power Supply 9V 1A DC Adapter 1000ma RF-Shielded
The HB-PCW-A1 Power Supply 9V 1A For Guitar Effect Pedals 100-240V Input Switching Adapter HB-CPW-A1 Power Adapter USA Plug

Product Description:

1. HB-PCW-A1,with a powerful output of up to 1000mA,you can supply power for a whole pedal board,including several digital pedals.

2. Special feature is the filter in the output cable which will reduce high frequency radiation and noise.

3. It is one of the quietest power supplies on the market.

4. Short Circuit Protection.

5. Over Temperature Protection.

6. This 9V 1A Power supply 1000ma consists of a 9V DC centre minus.

Specifications:
Input Voltage: AC 100-240V, 50/60Hz
Output: DC 9V 1A /1000ma
Connector Size:5.5mmx2.5mm Centre Negative -
Cord Length: 4ft


    • No Duty to Canada and USA
      Estimated by eBay FAST 'N FREE  FAST 'N FREE USA Shipping  (typically about 4 days  via  USPS )
      Ships from Canada
  • *Just to be clear on DUTY, (regardless of what warns buyers of ) Canada and the USA have a trade agreement in place that allows US citizens to purchase/import up to $800 dollars per purchase in to the United States from Canada with NO Duty at all, State taxes are another story, some states charge a TAX some do not, BUT NO duty.