Moen Canada MISO 8 Power Supply.
(my own experience)
Moen has been known to make super durable top notch and long lasting Quality PRO products like their GEC9 and GEC8 Jr, GEC8 Live Midi Switchers etc. This power supply is no exception. The MISO 8 is often passed by with musicians probably because of it's low price point, some may think unless one spends 200 and 300 dollars on a power supply then how good is it? This power supply is not the case as it can compete with some of the very best out there and sometimes even far exceeding in quality, I know, I have personally used most of them over my 50 years on stages. I am highly recommending the MISO8 because of it's quality and durability, after all I am in the pedal biz not the power supply biz, the less power problems my customers have the better my life gets.
Moen Canada Miso 8 is an Eight Output Effect Pedal Power Supply designed with a high efficiency transformer.
Each output is fully isolated, regulated and filtered,with over voltage protection.
The all aluminum anodized enclosure dissipates heat rapidly and keeps components cool.
The Miso 8 side mains voltage selector 110V / 220v ensures it working properly anywhere in the the world.
The Moen MISO 8 FX Power Supply powers, 9V, 12V & 18V effects pedals. Equipped with 2 adjustable outputs (9V-18V & 5V-9V) and 4 select-able outputs (9V or 12V), 9V' ensures all outputs to work with most every manufacturer's effects pedals on the market.
9V power options:
Outputs 1 - 6; An effects pedals that has the option of being powered by a 9V battery requires less than 70mA and can be powered by any outputs 1-6 set to 9V.
Outputs 7 - 8; Outputs 7 and 8 are designed for the higher current 9V effects pedals and switchers out now on the market,or a Daisy chain cable can be used to power more than one 9V pedals for these outputs depending on each pedal's current limitations .
12V power options:
Outputs: 3-6; When switched to 12V outputs 3,4,5,6 are designed to accept BOSS ACA type pedals and some digital modeling pedals.
18V power option;
Output 1; Begins at 9V and can be adjusted and up to 18V for pedals that require 18V.
Low Battery Simulation option:
Output 2; Can be adjusted from 9V down to 5V to be used to simulate a low battery which comes in handy if you have older transistor based distortion and fuzz pedals
What's Included:
• Moen Canada MISO 8 Power Supply
• AC Input cord
• 2 7.9” [20cm] Line 6 Converter Cables
• 2 19.7” [50 cm] Negative Center Output Cables
• 6 27.5” [70 cm] Negative Center Output Cables
• User's Manual & Warranty card
OUTPUT:
- All DC Outputs are regulated
- Over current protection on each output
| Output | DC Voltage | Current |
| 1 | 9-18V | 50mA |
| 2 | 5-9V | 100mA |
| 3-5 | 9.6V/12.4V | 100mA/50mA |
| 7-8 | 9V | 350mA |
Features:
• Detachable AC power cord.
• 150W AC output outlet.
• Input AC voltage select switch 110/220V for international use
• All Outputs Isolated, Filtered with Over-voltage Protection
• Select-able input (100 -240V)
• 1 Auxiliary AC output
• Transformer based design with separate grounds for true isolation!
• Adjustable and select-able output voltages 5V -18V. 9Volts are available on all 8 DC outputs
• 3 customer threaded mounting power supply mounting holes. (mounting screws not supplied.)
• Size 6" x 3.5" x 1 3/4"
(*NOTE Please select the power supply's AC Switch to your country's power requirement of 110V or 240V before plugging the power supply to a wall outlet, failure to do so can result in permanent damage to the power supply and not covered by warranty.)
No Duty to Canada and USA
FAST 'N FREE USA Shipping
Ships from Canada