|
This listing is for (1) ONE Dell PowerEdge 2950 Dual E5405 2.0GHz 8GB (as follows)
Unit is Pulled and Tested Working as it sits
No HDD or SSD also means NO OS / Operating System or software
Comes with 6 0WJo38 SCSI trays
FREE SHIPPING IS FOR LOWER 48 STATES ONLY (CONTINENTAL US)
223-4818 : Quad Core Xeon E5405 Processor 2x6MB Cache, 2.0GHz, 1333MHz FSB, PE2950
311-8034 : Quad Core Xeon E5405 Processor 2x6MB Cache, 2.0GHz, 1333MHz FSB, PE2950
310-9905 : Redundant Power Supply (JU081 PWR SPLY,750W,RDNT,DELTA)
311-6197 : 8GB 667MHz (4x2GB), Dual Ranked Fully Buffered DIMMs
311-7936 : 1x6 Backplane for 3.5-inch Hard Drives
320-4607 : Riser with 3 PCIe Slots for PowerEdge 2950
313-3933 : 8X DVD-ROM for PowerEdge 2950
341-5727 : Integrated SAS/SATA RAID 1/ RAID 5, PERC 6/i Integrated
341-5734 : PERC6i SAS RAID Controller, 2x4 Connectors, Int, PCIe, 256MB cache, x6 Bkpl
341-6567 : Qlogic 2560 Single Channel 8Gb Optical Fiber Channel HBA PCIe
313-3923 : Dell Remote Access Card, 5th Generation for PowerEdge Remote Management
430-2968 : LOM NICs are TOE Ready
313-3920 : Bezel for PE2950 With Keys
Linux Mint sudo inxi -F -m -s
-F, --full Full output. Includes all Upper Case line letters except -W, plus -s and -n. Does not show extra verbose options such as -d -f -i -l -m -o -p -r -t -u -x, unless specified. -m, --memory Memory (RAM) data. Requires root. Numbers of devices (slots) supported and individual memory devices (sticks of memory etc). For devices, shows device locator, size, speed, type (e.g. DDR3). If neither -I nor -tm are selected, also shows RAM used/total. -s, --sensors Sensors output (if sensors installed/configured): mobo/CPU/GPU temp; detected fan speeds. GPU temp only for Fglrx/Nvidia drivers. Nvidia shows screen number for > 1 screen. IPMI sensors if present. inxi Report
Dell Service Tag # HGG16H1
System: Host: testing Kernel: 5.4.0-64-generic x86_64 bits: 64 Desktop: Cinnamon 4.4.8 Distro: Linux Mint 19.3 Tricia Machine: Type: Server System: Dell product: PowerEdge 2950 v: N/A serial: HGG16H1 Mobo: Dell model: 0M332H v: A00 serial: ..CN7082187100O0. BIOS: Dell v: 2.7.0 date: 10/30/2010 Memory: RAM: total: 7.77 GiB used: 1.37 GiB (17.7%) Array-1: capacity: 63.75 GiB slots: 8 EC: Multi-bit ECC Device-1: DIMM1 size: 2 GiB speed: 667 MT/s Device-2: DIMM2 size: 2 GiB speed: 667 MT/s Device-3: DIMM3 size: 2 GiB speed: 667 MT/s Device-4: DIMM4 size: 2 GiB speed: 667 MT/s Device-5: DIMM5 size: No Module Installed Device-6: DIMM6 size: No Module Installed Device-7: DIMM7 size: No Module Installed Device-8: DIMM8 size: No Module Installed CPU: Topology: 2x Quad Core model: Intel Xeon E5405 bits: 64 type: MCP SMP L2 cache: 12.0 MiB Speed: 1995 MHz min/max: N/A Core speeds (MHz): 1: 1995 2: 1995 3: 1995 4: 1995 5: 1995 6: 1995 7: 1995 8: 1995 Graphics: Device-1: Advanced Micro Devices [AMD/ATI] ES1000 driver: radeon v: kernel Display: server: X.Org 1.20.8 driver: ati,radeon unloaded: fbdev,modesetting,vesa resolution: 1280x1024~60Hz OpenGL: renderer: llvmpipe (LLVM 10.0.0 128 bits) v: 3.3 Mesa 20.0.8 Audio: Message: No Device data found. Network: Device-1: Broadcom and subsidiaries NetXtreme II BCM5708 Gigabit Ethernet driver: bnx2 IF: eno1 state: up speed: 1000 Mbps duplex: full mac: 00:22:19:00:97:3f Device-2: Broadcom and subsidiaries NetXtreme II BCM5708 Gigabit Ethernet driver: bnx2 IF: eno2 state: up speed: 1000 Mbps duplex: full mac: 00:22:19:00:97:41 Drives: Local Storage: total: 57.33 GiB used: 12.91 GiB (22.5%) ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide size: 57.33 GiB RAID: Hardware-1: LSI Logic / Symbios Logic MegaRAID SAS 1078 driver: megaraid_sas Hardware-2: LSI Logic / Symbios Logic MegaRAID driver: megaraid Partition: ID-1: / size: 56.18 GiB used: 12.91 GiB (23.0%) fs: ext4 dev: /dev/sda1 Sensors: System Temperatures: cpu: 58.0 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 242 Uptime: 2h 29m Shell: bash inxi: 3.0.32 |