This nickel finished harp gives an added bonus of protecting the bulb from accidental breakage from being knocked over or bumped. Its heavy duty build makes it durable and sure to last. Most harps are interchangeable switching the harp is easy and can usually get you a perfect fit. The LampsUSA Harp Fitting Formula is Harp Height Shade Height - Drop - 12. Take the total shade height and subtract about a 12. Then subtract the drop, most shades have drops of about 1. This can really affect your harp size, be sure to measure this before ordering.

What is a harp Harps are what we call those flexible U-shaped metal wires that connect the lamp base to the lamp shade. Most harps have a small metal cap on each end to prevent the harp from slipping off the socket. A harp gives the added bonus of protecting the bulb from accidental breakage.

Often people buy a new harp when fitting a new lampshade. If you buy a shade EXACTLY like your old one, you should not need a new harp. Luckily, most harps are interchangeable, so if your new shade does not fit perfectly at first, switching the harp is easy and can usually get you a perfect fit.

If you need a different size harp, first remove the finial and you should see a number stamped into the top plate of your harp. This number indicates the height in inches of your current harp. Now you have a reference point and you can measure how much higher or shorter your new harp should be. Another way to raise the shade is to get a shade-riser, which we carry in 1 or 2 models.

How to find the perfect harp size every time You will know that you have the perfect harp height when you look across the bottom of the shade and the socket is almost visible. If your harp is too tall, you will see the socket. If the harp is too short, you will have to reach up too far to turn on the light.

The LampsUSA Harp Fitting Formula is Harp Height Shade Height - Drop - 12. Take the total shade height and subtract about a 12 to make sure the socket is not exposed. Then subtract the drop, to find the drop measure from the top of the shade down to the center of the spider. Most shades have drops of about 1. However, some taller shades have drops of 3-4. This can really affect your harp size, be sure to measure this before ordering.

• COLOR Polished Nickel Finish
• PERFECT SIZE - This lamp harp is 6 high, and fits lampshades around 7-8 tall. Leaves plenty of room for standard light bulbs meant for lamps. Harp width is 3.5.
• DURABLE - Heavy Duty Construction with thickness of 5 mm makes it durable and is sure to last.
• EASY TO INSTALL Includes detachable saddle, with center opening of 38, this can be removed if wishing to keep your existing saddle.
• SUITABLE FOR - Most table and floor lamps. This harp fits standard spider fitting lamp shades. Accepts standard 14-27 threaded finials finial and lamp shade not included.