IITEM DESCRIPTION: |
MELLANOX MAM1Q00A-QSA BULK PACKED INCLUDES WHAT IS SHOWN MAKE SURE YOUR NETWORK SUPPORTS THIS INTERFACE! Mellanox DynamiX QSA QSFP+ to SFP+ Adapter
Mellanox
DynamiX QSA™, QSFP+ to SFP+ adapter, enables a smooth cost-effective
connection between a single lane transceiver/cable and a quad lane port.
The QSA provides the option to connect an SFP+/SFP transceiver or cable
to a QSFP+ port of an Nx40GbE switch or network interface card (NIC).
The
QSA should be installed into a QSFP+ port, and is intended to either
connect a switch QSFP+ port to a NIC SFP port or connect a NIC QSFP+
port to a switch SFP port. For example, an SFP-based cable can be
connected to Mellanox’s 40GbE ConnectX®-3 NIC and to the 48 x 10GbE
SX1012 Ethernet switch.
The QSA conforms to
the SFF8418/8419 for the SFP side and to SFF-8436 for the QSFP+
standards and is thoroughly tested to meet strict quality requirements.
The adapter has a QSFP+ form factor with a receptacle for SFP+
transceiver/AOC/DAC connector. The QSA provides a solution for
integrating systems using different vendors’ equipment, since it is
vendor agnostic and provides a direct path to the SFP unit’s memory. The
QSA interoperates with all major optical module and direct attach
copper cable vendors.
Its design ensures
minimum loss on the conversion path between the QSFP+ cage and the SFP
receptacle. The RF (high speed data) channel of the SFP receptacle is
connected to lane 1 of the QSFP+ connector. The three remaining RF
channels on the QSFP+ connector are not connected. The QSA is qualified
for 10GbE SFP+ and 1GbE SFP transceivers meeting the Small Form Factor
Pluggable (SFP) Transceiver Multi-source
Agreement (MSA).
Highlights
|
ITEM CONDITION AND NOTES: |
|
PLEASE READ BELOW BEFORE PURCHASING!!
WE HAVE BEEN IN BUSINESS FOR OVER 25 YEARS, VISIT OUR STORE FOR ALL OF YOUR OTHER NEEDS! |
||||||||||||
|