DIY LVL23W "XL WHITE Edition" Bartop / Tabletop Arcade Cabinet Kit by LEP1 Customs

* EASY TO ASSEMBLE WITH ASSEMBLY INSTRUCTIONS AND PICTURES *

AVAILABLE IN HAPP or SANWA Variations
HAPP VARIATION - 2 Joysticks with HAPP(almost square) mounting pattern, 16 Standard Arcade Buttons [1 1/8" or 28mm]
SANWA VARIATION - 2 Joysticks with SANWA(narrow rectangle) mounting pattern, 12 30mm Action Buttons, 4 24mm coin/start buttons

This kit contains the pre-cut, routed t-slotted, and pre-drilled melamine for a DIY Bartop/Tabletop Arcade Cabinet, and is the ONLY kit to feature the following:

Pre-routed integrated marquee bracket
Pre-routed baton indents for easier assembly
Adjustable horizontal monitor positioning
Pre-drilled holes for mounting two 4" speakers
Pre-drilled holes for mounting 2 Happ Joysticks
Pre-drilled holes for cabinet assembly
Numbered baton supports and the 26 screws for basic assembly
T-Slotted edges for T-Molding

To assemble the basic cabinet, all you need to supply is the wood/melamine glue and a screwdriver.

That's right, all parts needed to assemble the basic cabinet are included (except for the wood/melamine glue and your choice of 3/4" t-molding)!

For a complete assembly, we suggest the following parts (not included):

3/4" T-Molding
Up to 19" Square LCD Monitor or Up to 23" Widescreen LCD Monitor (cabinet has 20.75" internal width)
4 screws for LCD VESA Mount (4 or 8 washers are suggested)
8 Screws, 8 washers, and 8 nuts for joystick mounting
HAPP VARIATION - 2 Joysticks with HAPP(almost square) mounting pattern
HAPP VARIATION - 16 Standard Arcade Buttons [1 1/8" or 28mm]
SANWA VARIATION - 2 Joysticks with SANWA(narrow rectangle) mounting pattern
SANWA VARIATION - 12 30mm Action Buttons, 4 24mm coin/start buttons
2 4" Speakers
8 screws, 8 washers, 8 nuts for speaker mounting
Game system (Raspberry Pi, Game Elf, Pandora's Box, Mini PC, etc)
Power supply
Wiring (as needed by Game System, speakers, and monitor)
Marquee Insert (listing photo shows professionally printed on translite)
Plexiglass to cover LCD (optional/personal taste)
Marquee backlight (optional/personal taste)
Touch up Paint

The listing pictures feature our kit assembled with items that are not included: wood glue, t-molding, and custom marquee professionally printed on translite

The assembly was easy enough to be completed by one adult arcade enthusiast.

NOTE: The monitor mounting panel is not seen in the photo and is set on the inside of the cabinet at the builder's desired placement.

If you have any questions, feel free to ask.