Brand NEW!
 
2-Channel - Class A/B, 500w Max Power - Bridgeable Amplifier

 500 Watts Max Power
 Automatic signal sensing and Turn-ON
 Hi-Volt input level control
 Balanced isolator input circuit

From dramatic distinction to dramatic design, Pioneer's new GM-Series amplifiers are thrillers in every sense, pushing the limits of flexibility and functionality.

Growing Power, Shrinking Size
New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient size for flexibility of installation in various car cabins.

Automatic Signal Sensing and Turn-On
Pioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver.

When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer's amplifiers automatically detect the input signal and select RCA level or speaker level.

What’s in the Box
 2-Channel amplifier
 25A ATO fuse (installed)
 Speaker input harness with four 4" wires
 4 Self-tapping screws (3/4" length)
 Owner's Manual (Eng/Fren)
 1 Year Warranty sheet

STANDARDS
 CEA-2006 Compliant - Yes
PERFORMANCE
 Avg Current Consumption (amps x #ch) - 4 Ohm - 6.5A (1Ch) / 4 Ohm - 4A (2Ch)
 Crossover Network Channel - LPF - A Ch 80Hz
 Crossover Network Channel Slope - -12db/oct (A Ch)
 Frequency Response Channel - 10Hz to 70kHz (+0dB,-3dB) A Ch
 Fuse Rating - 25 A
 Input Level @Gain Max - 0.3 V to 6.5 V - RCA / 3.0 V to 26 V - Speaker
 Load Impedance Allowance - 2 ohm to 8 ohm allowable
 Max Power Output - 2 Ohm - 250W x 2 / 4 Ohm - 170W x 2 / 4 Ohm Bridged - 500W
 Nominal Power Output - 2 Ohm - 95W x 2 / 4 Ohm - 50W x 2 / 4 Ohm Bridged - 190W x 1
 RCA Input - 2-Channel
 Signal to Noise - 78 dBA (Reference: 1 W into 4 ohm)

AMPLIFIER FEATURES
 Bridgable - Yes
 Class - A/B
 Grounding System - Negative
 Power Source - 14.4V (10.8 V to 15.1 V allowable)
 Protection Control system - Yes
 Terminal Type - Screw
 Unit Weight - 3.1 lbs
 
- All international buyers are responsible for all tax, duties and/or customs fees.