The Dayton Audio Micro-Edge series of in-wall and in-ceiling speakers combine sleek, minimalistic styling with high-quality home theater and musical performance. Dayton Audio's ME10S 10" in-wall sub now provides an additional option to add a strong, yet defined bass presence while remaining hidden in your room's decor.
Key Features
• Slim, stealthy in-wall design mounts into any 3-1/2" deep stud cavity making the sub easy to install
• Robust high-excursion 10" woofer delivers outstanding low-end for home theaters or listening rooms
• Eight mounting ears provide vibration-free, air-tight installation to minimize unwanted noise and rattle
• Micro-Edge grill design eliminates the conventional wide in-wall design to remain unobtrusive to room decor.
The Dayton Audio ME10S 10" Micro-Edge in-wall subwoofer delivers high-power bass for the maximum low-end sonic punch. With a clean and defined bass response, the ME10S is the perfect addition to almost any home theater or listening room. Featuring an ultra-slim Micro-Edge frame, the ME10S almost disappears into your wall and is easily installed to match your room decor.
Maximum Low End Punch
Utilizing a robust 10" high-excursion treated paper cone woofer, the ME10S produces a strong 200 watts of power to add lively, deep bass to your home theater or listening room. The ME10S carries on the Dayton Audio Micro-Edge reputation of high-performance speakers that blend into their environments without disrupting room aesthetics. Adding the ME10S subwoofer to your existing system will enhance your bass response with a strong and tight low-end signal which brings your movies to life and gives you concert-like musical performance. The sub uses an 8-ohm single coil design to use with any stand-alone sub amplifier.
Chameleon-esque Design
The design of the ME10S allows you to add deep sub without disturbing your room's aesthetic vibe. Using the same Micro-Edge frames as the Dayton Audio ME line, the sub's presence is felt and not seen. The sub's stealthy design is easily installed into any 3-1/2" deep stud cavity and features eight mounting ears that provide a solid, vibration-free, air-tight installation.
Seamless Integration
All Dayton Audio Micro-Edge (ME-series) speakers are timbre-matched for a seamless and consistent home theater experience when used together.
Specifications:
• Style: In-wall
• Woofer: 10" treated paper cone
• Frequency response: 30-250 Hz
• Power handling (RMS/Peak): 100/200 watts
• Impedance: 8 ohms
• SPL: 88 dB (1W/1m)
• Low-pass crossover: 250 Hz
• Crossover slope: 18 dB/octave
• Cutout size: 11-1/4" H x 11-1/4" W
• Mounting depth: 3-1/2"
• Dimensions: 12-3/8" H x 12-3/8" W x 4" D