This 2nd order (i.e. 12 dB per octave) high pass Linkwitz-Riley filter from
Dayton Audio passes frequencies above 5,500 Hz and can easily be combined with
other filters in this series to create 2-way or even 3-way crossover networks.
Designed for use with 4 ohm drivers.
Key Features
High quality poly capacitor in series with the driver
High quality components are securely fastened to PCB
Frequencies can be staggered or overlapped for desired response
High quality red PC board with EVA backing to prevent shorts and
vibration
Dual 0.205" terminals at each connection point for easy parallel
wiring
Dayton Audio's premium inline passive filters make it easy to limit a
driver's frequency response to a specific desired bandwidth. By using
combinations of these filters you can create complete 2-way or 3-way crossovers.
The components used in each of these are the same high quality you have come to
expect from Dayton Audio.
This 12dB/octave 5,500 Hz high pass filter can be combined with our 5,500
Hz low pass for a 2nd order Linkwitz-Riley crossover, which sums for flat
transfer function across the crossover frequency. In addition, you can stagger
or overlap filter frequencies to overcome peaks and dips in individual drivers'
frequency response to create crossovers that acoustically sum flat across the
crossover point.
Mounts to our 5" X 7" blank terminal plate (part # 260-110).
Specifications:
Type: High Pass Filter
Frequency: 5,500 Hz
Impedance: 4 ohms
Dimension: 3.93" x 2.36" (100 mm x 60 mm)
Power handling: 250 watts
Series capacitor value: 3.6 µF
Parallel inductor value: 0.23 mH