YOU CAN MAKE A STEPPING STONE LIKE THAT PICTURED...
FOR LESS THAN $0.35 PER SQUARE FOOT!
AND YOU CAN START NEXT WEEK!
The "HOW TO" process is so simple... virtually anyone can do it!
It's like making a cake! But no oven is needed!
HERE'S HOW...
1. Lubricate the molds... a light vegetable oil will do if you don't have mold release.
2. Mix a bag of pre-mix concrete… get a shovel, water, and something to mix it in.
3. Add some concrete color, which is optional… unless you want just plain gray.
4. Pour mix into molds… vibrate a bit to compact concrete and release air bubbles.
5. Let the filled molds sit a day or so, undisturbed… over-night is fine.
6. Carefully flip the molds over the next day… and pop out what you’ve created from the mold!
That is obviously a simplified version of the process, but it is that easy.
And FREE instructions and email support are included with each purchase.
We are proud to say that ALL of our products and the raw materials used in them are
MADE IN THE USA
And our molds are designed and have been manufactured by us in Florida since 1992!
WHETHER YOU WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE... WE ARE YOUR SOURCE!
YOU ARE PURCHASING ONE 18"X18"X2-1/2" THICK, #SS-1818-SL-C NATURAL SLATE-FACED, STEPPING STONE MOLD, TO MAKE CUSTOM, HAND-CRAFTED FLOOR TILE, PAVERS, STONE VENEER, AND STEPPING STONES... FROM 1/2" UP TO 1-3/4" THICK! THIS MOLD WAS TAKEN FROM A NATURAL BLOCK OF TEXTURED SLATE, AND HAS THE UNEVEN TEXTURE AND SIDES INHERENT IN THIS BEAUTFUL STONE. (THIS IS OUR #1818-SL-C)
SEE OUR OTHER THREE MOLDS IN THIS STYLE THAT RANGE FROM 1-3/4" THICK TO 2-3/4" THICK. OUR COMPLETE SET OF FOUR MOLDS CONSIST OF #1818-SL-A, #1818-SL-B, 1818-SL-C, AND 1818-SL-D.
WANT VARIETY?
YOU CAN ACTUALLY MAKE THE STONE TO GO ON THE OUTSIDE OF YOUR HOME, FIREPLACE, WALLS, ETC., OR PAVER STONES FOR YOUR WALK, PATIO, POOL DECK, OR DRIVEWAY WITH THIS MOLD. WE WILL GIVE YOU FORMULAS FOR BOTH REGULAR AND LIGHTWEIGHT STONE IF DESIRED.
THIS STONE IS GOING ON OUR CASTLE TERRACE. "Castle McKenzie" IS A VACATION RENTAL IN MURPHY, NC.
Much of the tile and stone pictured in our photo listings was recently manufactured by purchasers of this or other styles of our molds, who had no previous experience making concrete tile or stone veneer! Our molds are made from .060, hi-impact rubberized ABS Plastic, and can be used hundreds of times if cared for properly! The photo of the mold illustrates the actual texture of this mold.
NEVER DONE THIS BEFORE? IT'S REALLY EASY! NO KILN NEEDED EITHER!
COMPLETE INSTRUCTIONS ARE INCLUDED WITH EACH PURCHASE!
Interested in starting your own business?
Become an "Olde World Tile" Producer Today!
Since 1992, we've trained hundreds of entrepreneurs worldwide in how to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!
For additional product information, tile and stone installation photos, and more... visit our extensive TheMoldStore and Oldeworld websites, or if you have questions, feel free to call or email us.
AP
